UCC24630 Overview
The UCC24630 SR controller is a high-performance controller and driver for N-channel MOSFET power devices used for secondary-side synchronous rectification. The bination of controller and MOSFET emulates a near-ideal diode rectifier. This solution not only directly reduces power dissipation of the rectifier but also reduces primary-side losses as well, due to pounding of efficiency gains.
UCC24630 Key Features
- 1 Secondary-Side SR Controller Optimized for 5-V to 24-V Flyback Systems
- Operating Frequency Up to 200 kHz
- Volt-Second Balance SR On-Time Control
- Minimize Effect of MOSFET Device and Layout
- CCM Operation patibility
- patible with PSR and SSR Control
- Auto Low-Power Detect and 110-µA Standby
- Wide VDD Range from 3.6 V to 28 V
- Rail-to-Rail Gate Driver with 13-V Clamp
- Open and Short Pin Fault Protection
UCC24630 Applications
- 5-V to 24-V Output Flyback and Forward Converters
- USB-PD Adapters and Chargers with Type-C Connector
- Chargers for Smart Phones and Tablets