UCC21520A Datasheet PDF (Dual-Channel Gate Driver) | Download Texas Instruments UCC21520A

UCC21520A - Dual-Channel Gate Driver

This page provides the datasheet information for the UCC21520A, a member of the UCC21520 Dual-Channel Gate Driver family.

Description

The UCC21520 is an isolated dual-channel gate driver with 4A source and 6A sink peak current.

It is designed to drive power MOSFETs, IGBTs, and SiC MOSFETs up to 5MHz.

Features

Junction temperature range.
40 to +150°C.
Switching parameters:.
33ns typical propagation delay.
20ns minimum pulse width.
6ns maximum pulse-width distortion.
Common-mode transient immunity (CMTI) greater than 125V/ns.
Surge immunity up to 10kV.
4A peak source, 6A peak sink output.
3V to 18V input VCCI range to interface with both digital and analog controllers.
Up to 25V VDD output drive supply.

Datasheet Details

Part number	UCC21520A
Manufacturer	Texas Instruments
File Size	2.41 MB
Description	Dual-Channel Gate Driver
Datasheet	UCC21520A Datasheet
Additional preview pages of the UCC21520A datasheet.

📁 Similar Datasheet

UCC2105 - CC/CV MODE STEP DOWN SWITCHING REGULATOR (UTC)

UCC25701 - Advanced Voltage Mode Pulse Width Modulator (Unitrode)

UCC25702 - Advanced Voltage Mode Pulse Width Modulator (Unitrode)

UCC2581 - Micropower Voltage Mode PWM (Unitrode)

UCC2583 - (UCC1583 - UCC3583) Switch Mode Secondary Side Post Regulator (Unitrode)

UCC2750 - Source Ringer Controller (Unitrode)

UCC27519DBVR - 4A Single-Channel Non-Inverting Gate Driver (UMW)

UCC2807-1 - Programmable Maximum Duty Cycle PWM Controller (Unitrode)

UCC2807-2 - Programmable Maximum Duty Cycle PWM Controller (Unitrode)

UCC2807-3 - Programmable Maximum Duty Cycle PWM Controller (Unitrode)

Full PDF Text Transcription

Click to expand full text

UCC21520, UCC21520A SLUSCJ9F – JUNE 2016 – REVISED NOVEMBER 2024 UCC21520, UCC21520A 4A, 6A, 5.7kVRMS Isolated Dual-Channel Gate Drivers 1 Features • Junction temperature range –40 to +150°C • Switching parameters: – 33ns typical propagation delay – 20ns minimum pulse width – 6ns maximum pulse-width distortion • Common-mode transient immunity (CMTI) greater than 125V/ns • Surge immunity up to 10kV • 4A peak source, 6A peak sink output • 3V to 18V input VCCI range to interface with both digital and analog controllers • Up to 25V VDD output drive supply – 5V and 8V VDD UVLO options • Programmable overlap and dead time • Fast disable for power sequencing • Safety-related certifications (planned): – 8000VPK reinforced Isolation per DIN EN IEC 60747-17 (VDE 0884-17) – 5.

Published: Aug 23, 2019 |