Datasheet4U Logo Datasheet4U.com

TUSB1105 - ADVANCED UNIVERSAL SERIAL BUS TRANSCEIVERS

Description

The TUSB1105 and TUSB1106 universal serial bus (USB) transceivers are compliant with the Universal Serial Bus Specification Rev.

2.0.

These devices can transmit and receive serial data at both full-speed (12-Mbit/s) and low-speed (1.5-Mbit/s) data rates.

Features

  • 1.
  • Compatible With Universal Serial Bus Specification Rev. 2.0.
  • Transmit and Receive Serial Data at Both Full-Speed (12-Mbit/s) and Low-Speed (1.5-Mbit/s) Data Rates.
  • Integrated Bypassable 5-V to 3.3-V Voltage Regulator for Powering Via USB VBUS.
  • VBUS Disconnection Indication Through VP and VM.
  • Used as USB Device Transceiver or USB Host Transceiver.
  • Stable RCV Output During SE0 Condition.
  • Two Single-Ended Receivers With Hysteresis.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TUSD05H4U Ultra Low Capacitance ESD Protection Array KUU

Other Datasheets by Texas Instruments

Part Number Description
TUSB1106 ADVANCED UNIVERSAL SERIAL BUS TRANSCEIVERS
TUSB1106-Q1 ADVANCED UNIVERSAL SERIAL BUS TRANSCEIVERS
TUSB1146 Linear Redriver Crosspoint Switch
TUSB1002 Dual-Channel Linear Redriver
TUSB1042I 2:1 Linear Redriver Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TUSB1105, TUSB1106 www.ti.com SCAS818E – MAY 2006 – REVISED SEPTEMBER 2010 ADVANCED UNIVERSAL SERIAL BUS TRANSCEIVERS Check for Samples: TUSB1105, TUSB1106 FEATURES 1 • Compatible With Universal Serial Bus Specification Rev. 2.0 • Transmit and Receive Serial Data at Both Full-Speed (12-Mbit/s) and Low-Speed (1.5-Mbit/s) Data Rates • Integrated Bypassable 5-V to 3.3-V Voltage Regulator for Powering Via USB VBUS • VBUS Disconnection Indication Through VP and VM • Used as USB Device Transceiver or USB Host Transceiver • Stable RCV Output During SE0 Condition • Two Single-Ended Receivers With Hysteresis • Low-Power Operation, Ideal for Portable Equipment • Support I/O Voltage Range From 1.65 V to 3.6 V • IEC-61000-4-2 ESD Compliant – ±9-kV Contact-Discharge Model (D+, D–, VCC(5.
Published: |