Datasheet4U Logo Datasheet4U.com

TPS66120 - Integrated Sink

General Description

The TPS6612x contains an integrated 4-V to 22-V Sink power path.

The power path supports overtemperature and reverse current protection.

VBUS has overvoltage protection with its level being set by an optional external resistor divider.

Key Features

  • 1 Integrated 22 mΩ (typical), 32-V tolerant NFET 4V to 22-V sink path, up to 5 A.
  • Built-in soft-start to limit in-rush currents.
  • Integrated high voltage VBUS LDO regulator (3.3- V or 5.0-V per device type).
  • Optional VBUS overvoltage protection via pin configuration.
  • System supply and VBUS undervoltage protection.
  • Overtemperature protection.
  • Reverse-current protection.
  • Fault pin with de-glitched fault reporting.
  • Sma.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS603A Photo Transistor Toshiba Semiconductor
TPS604 POWER SCHOTTKY RECTIFIER STMicroelectronics
TPS606 TERMINAL OPTO-ELECTRONIC SWITCH Toshiba Semiconductor
TPS60LB SWITCHING MODE 60W LOW COST BOX TYPE POWER SUPPLY Total Power International
TPS611 Phototransistor Toshiba

Other Datasheets by Texas Instruments

Part Number Description
TPS66121 Integrated Sink
TPS66020 Integrated Source and Sink Power Multiplexer
TPS66021 Integrated Source and Sink Power Multiplexer
TPS60100 Regulated 3.3-V 200-mA Low-Noise Charge Pump DC/DC Converter
TPS60101 Regulated 3.3-V High-Power Low-Noise Charge Pump DC/DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community TPS66120, TPS66121 SLVSEW9B – AUGUST 2019 – REVISED DECEMBER 2019 TPS6612x Integrated Sink with VBUS LDO Regulator 1 Features •1 Integrated 22 mΩ (typical), 32-V tolerant NFET 4V to 22-V sink path, up to 5 A • Built-in soft-start to limit in-rush currents • Integrated high voltage VBUS LDO regulator (3.3- V or 5.0-V per device type) • Optional VBUS overvoltage protection via pin configuration. • System supply and VBUS undervoltage protection • Overtemperature protection • Reverse-current protection • Fault pin with de-glitched fault reporting • Small footprint WCSP packaging, no HDI required.