Datasheet4U Logo Datasheet4U.com

TPS6521835 - PMIC

General Description

The TPS6521835 is a single chip power management IC, specifically designed to support both portable (Li-Ion battery) and non-portable (5-V adapter) applications.The device is characterized across a 40°C to +105°C temperature range, making it suitable for a wide range of industrial applica

Key Features

  • Three Adjustable Step-Down Converters With Integrated Switching FETs (DCDC1, DCDC2, and DCDC3):.
  • DCDC1: 1.28-V Default, up to 1.8 A.
  • DCDC2: 1.35-V Default, up to 1.8A.
  • DCDC3: 3.3-V Default, up to 1.8 A.
  • VIN Range From 2.7 V to 5.5 V.
  • Adjustable Output Voltage Range 0.85 V to 1.675 V (DCDC1 and DCDC2).
  • Adjustable Output Voltage Range 0.9 V to 3.4 V (DCDC3).
  • Power Save Mode at Light Load Current.
  • 100% Duty Cycle for.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS603A Photo Transistor Toshiba Semiconductor
TPS604 POWER SCHOTTKY RECTIFIER STMicroelectronics
TPS606 TERMINAL OPTO-ELECTRONIC SWITCH Toshiba Semiconductor
TPS60LB SWITCHING MODE 60W LOW COST BOX TYPE POWER SUPPLY Total Power International
TPS611 Phototransistor Toshiba

Other Datasheets by Texas Instruments

Part Number Description
TPS65218 Power Management
TPS65217 Single-Chip PMIC
TPS65217A Single-Chip PMIC
TPS65217B Single-Chip PMIC
TPS65217C Single-Chip PMIC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TPS6521835 SLDS266A – NOVEMBER 2020 – REVISED AUGUST 2021 TPS6521835 Power Management IC (PMIC) for NXP i.MX 6ULL, 6ULZ, and 6UltraLite 1 Features • Three Adjustable Step-Down Converters With Integrated Switching FETs (DCDC1, DCDC2, and DCDC3): – DCDC1: 1.28-V Default, up to 1.8 A – DCDC2: 1.35-V Default, up to 1.8A – DCDC3: 3.3-V Default, up to 1.8 A – VIN Range From 2.7 V to 5.5 V – Adjustable Output Voltage Range 0.85 V to 1.675 V (DCDC1 and DCDC2) – Adjustable Output Voltage Range 0.9 V to 3.4 V (DCDC3) – Power Save Mode at Light Load Current – 100% Duty Cycle for Lowest Dropout – Active Output-Discharge When Disabled • One Adjustable Buck-Boost Converter With Integrated Switching FETs (DCDC4): – DCDC4: 1.8-V Default, up to 1.6 A – VIN Range from 2.7 V to 5.