Datasheet4U Logo Datasheet4U.com

TPS63810 - 2.5-A Buck-Boost Converters

General Description

The TPS63810 and TPS63811 are high efficiency, high output current buck-boost converters fully programmable through I2C.

Key Features

  • 1 Input voltage range: 2.2 V to 5.5 V.
  • Output voltage range: 1.8 V to 5.2 V.
  • I2C-configurable during operation and shutdown.
  • VSEL pin to toggle between two output voltage presets.
  • Output current.
  • Up to 2.5 A for VI ≥ 2.5 V, VO = 3.3 V.
  • Up to 2.5 A for VI ≥ 2.8 V, VO = 3.5 V.
  • High efficiency over entire load range.
  • Low 13-μA operating quiescent current.
  • Automatic power save mode and forced PWM mode (I2C-conf.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS603A Photo Transistor Toshiba Semiconductor
TPS604 POWER SCHOTTKY RECTIFIER STMicroelectronics
TPS606 TERMINAL OPTO-ELECTRONIC SWITCH Toshiba Semiconductor
TPS60LB SWITCHING MODE 60W LOW COST BOX TYPE POWER SUPPLY Total Power International
TPS611 Phototransistor Toshiba

Other Datasheets by Texas Instruments

Part Number Description
TPS63811 2.5-A Buck-Boost Converters
TPS63802 Buck-boost Converter
TPS63805 Buck-boost Converter
TPS63806 Buck-boost Converter
TPS63000 High-Efficient Single Inductor Buck-Boost Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community TPS63810, TPS63811 SLVSEK4C – JULY 2019 – REVISED FEBRUARY 2020 TPS63810 and TPS63811 – 2.5-A Buck-Boost Converters with I2C Interface 1 Features •1 Input voltage range: 2.2 V to 5.5 V • Output voltage range: 1.8 V to 5.2 V – I2C-configurable during operation and shutdown – VSEL pin to toggle between two output voltage presets • Output current – Up to 2.5 A for VI ≥ 2.5 V, VO = 3.3 V – Up to 2.5 A for VI ≥ 2.8 V, VO = 3.