Datasheet4U Logo Datasheet4U.com

TPS61280A - Wide- Voltage Battery Front-End DC/DC Converter

General Description

The TPS6128xA device provides a power supply solution for products powered by either by a Li-Ion, Nickel-Rich, Silicon Anode, Li-Ion or LiFePO4 battery.

The voltage range is optimized for single-cell portable applications like in smart-phones or tablet PCs.

Key Features

  • 1 95% Efficiency at 2.3MHz Operation.
  • 3µA Quiescent Current in Low IQ Pass-Through Mode.
  • Wide VIN Range From 2.3V to 4.8V.
  • IOUT ≥ 4A (Peak) at VOUT = 3.35V, VIN ≥ 2.65V.
  • Integrated Pass-Through Mode (35mΩ).
  • Programmable Valley Inductor Current Limit and Output Voltage.
  • True Pass-Through Mode During Shutdown.
  • Best-in-Class Line and Load Transient.
  • Low-Ripple Light-Load PFM Mode.
  • In-Situ Customization with On.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS612 PHOTO TRANSISTOR Toshiba Semiconductor
TPS611 Phototransistor Toshiba
TPS611F Phototransistor Toshiba
TPS613 SILICON NPN TRANSISTOR Toshiba
TPS614 PHOTO TRANSISTOR Toshiba Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
TPS61280 Wide- Voltage Battery Front-End DC/DC Converter
TPS61281 Wide- Voltage Battery Front-End DC/DC Converter
TPS61281A Wide- Voltage Battery Front-End DC/DC Converter
TPS61282 Wide- Voltage Battery Front-End DC/DC Converter
TPS61282A Wide- Voltage Battery Front-End DC/DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community TPS61280A, TPS61281A, TPS61282A SLVSCG9B – MAY 2014 – REVISED SEPTEMBER 2016 TPS6128xA Low-, Wide- Voltage Battery Front-End DC/DC Converter Single-Cell Li-Ion, Ni-Rich, Si-Anode Applications 1 Features •1 95% Efficiency at 2.3MHz Operation • 3µA Quiescent Current in Low IQ Pass-Through Mode • Wide VIN Range From 2.3V to 4.8V • IOUT ≥ 4A (Peak) at VOUT = 3.35V, VIN ≥ 2.65V • Integrated Pass-Through Mode (35mΩ) • Programmable Valley Inductor Current Limit and Output Voltage • True Pass-Through Mode During Shutdown • Best-in-Class Line and Load Transient • Low-Ripple Light-Load PFM Mode • In-Situ Customization with On-Chip E2PROM (Write Protection) • Two Interface Options: – I2C Compatible I/F up to 3.