Datasheet4U Logo Datasheet4U.com

TPS61240 - 3.5-MHz High Efficiency Step-Up Converter

General Description

The TPS6124x device is a highly efficient synchronous step-up DC-DC converter optimized for products powered by either a three-cell alkaline, NiCd or NiMH, or one-cell Li-Ion or Li-Polymer battery.

The TPS6124x supports output currents up to 450 mA.

Key Features

  • 1 Efficiency > 90% at Nominal Operating Conditions.
  • Total DC Output Voltage Accuracy 5.0 V±2%.
  • Typical 30-μA Quiescent Current.
  • Best in Class Line and Load Transient.
  • Wide VIN Range From 2.3 V to 5.5 V.
  • Output Current up to 450 mA.
  • Automatic PFM/PWM Mode Transition.
  • Low Ripple Power Save Mode for Improved Efficiency at Light Loads.
  • Internal Softstart, 250-μs Typical Start-Up Time.
  • 3.5-MHz Typical Operating.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS612 PHOTO TRANSISTOR Toshiba Semiconductor
TPS611 Phototransistor Toshiba
TPS611F Phototransistor Toshiba
TPS613 SILICON NPN TRANSISTOR Toshiba
TPS614 PHOTO TRANSISTOR Toshiba Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
TPS61240-Q1 3.5-MHz High Efficiency Step-Up Converter
TPS61241 3.5-MHz High Efficiency Step-Up Converter
TPS61200 Low Input Voltage Synchronous Boost Converter
TPS61201 Low Input Voltage Synchronous Boost Converter
TPS61202 Low Input Voltage Synchronous Boost Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community TPS61240, TPS61241 SLVS806D – APRIL 2009 – REVISED DECEMBER 2015 TPS6124x 3.5-MHz High Efficiency Step-Up Converter 1 Features •1 Efficiency > 90% at Nominal Operating Conditions • Total DC Output Voltage Accuracy 5.0 V±2% • Typical 30-μA Quiescent Current • Best in Class Line and Load Transient • Wide VIN Range From 2.3 V to 5.5 V • Output Current up to 450 mA • Automatic PFM/PWM Mode Transition • Low Ripple Power Save Mode for Improved Efficiency at Light Loads • Internal Softstart, 250-μs Typical Start-Up Time • 3.