TPS61062 Datasheet | Texas Instruments

Features - 1 LED Driver With Integrated Overvoltage and Short-Circuit Protection - 2.7-V to 6-V Input Voltage Range - 500-m V or 250-m V Feedback Voltage - TPS61060 Powers up to 3 LEDs - TPS61061 Powers up to 4 LEDs - TPS61062 Powers up to 5 LEDs - PWM Brightness Control on Enable - Digital Brightness Control on ILED - 1-MHz Fixed Switching Frequency - 400-m A Internal Power MOSFET Switch - LEDs Disconnected During Shutdown - Operates With Small-Output Capacitors Down to 220 n F - Up to 80% Efficiency - 8-Pin Nano Free™ Package (Chipscale, CSP) - 3-mm × 3-mm QFN Package 2 Applications - White LED Drivers - Cellular Phones - PDAs, Pocket PCs, and Smart Phones - Digital Still Cameras - Handheld Devices 3 Description The TPS6106x is a high-frequency, synchronous boost converter with constant current output to drive up to five white LEDs. For maximum safety, the device features integrated overvoltage and an advanced short-circuit protection when the output is shorted to ground. The device operates with 1-MHz fixed switching frequency to allow for the use of small external ponents and to simplify possible EMI problems. The device es with three different overvoltage protection thresholds (14 V, 18 V, and 23 V) to allow inexpensive and small-output capacitors with lower voltage ratings. The LED current is initially set with the external sense resistor Rs, and the feedback voltage is regulated to 500 m V or 250 m V, depending on the configuration of the ILED pin. Digital brightness control is implemented by applying a simple digital signal to the ILED pin. Alternatively, a PWM signal up to 1 k Hz can be applied to the enable pin to control the brightness of the LED. During shutdown, the output is disconnected from the input to avoid leakage current through the LEDs. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) TPS61060, TPS61061, TPS61062 VSON (8) DSBGA (8) 3.00 mm × 3.00 mm 1.446 mm × 1.446 mm (1) For all available packages, see the orderable addendum at the...