TPS568230 Datasheet | Texas Instruments

Features - 1 Input voltage range: 4.5 V to 18 V - D-CAP3™ architecture control for fast transient response - Output voltage range: 0.6 V to 7 V - 0.6-V±1% reference voltage (25°C) - Supports 8-A continuous output current - Integrated 19.5-mΩ and 9.5-mΩ RDS(on) internal power MOSFET - ULQ™(Ultra Low Quiescent current) feature to enable long battery life - Selectable operation modes: - Forced continuous conduction mode (FCCM) - Out-of-Audio™(OOA) Mode - Advanced Eco-Mode™ - Selectable 600-k Hz, 800-k Hz and 1-MHz switching frequency - Supports up to 90% duty operation - Adjustable soft start time by SS pin - Power good output - Built-in output discharge function - Cycle-by-cycle over current protection - Non-latched for fault protection - Small 3.0-mm × 3.0-mm Hot Rod™ QFN package 2 Applications - Digital TV, set-top box, gaming consoles - Server, storage and networking point-of-load - Industrial PC and factory automation applications - Distributed power systems with typical 5-V, 12-V, 15-V input 3 Description The TPS568230 is a cost effective, high-voltage input, high efficiency synchronous buck converter with integrated MOSFETs. The TPS568230 has the ULQ™ (Ultra Low Quiescent current) feature to enable low-bias current. It operates with supply input voltage from 4.5 V to 18 V. It uses DCAP3™ control mode to provide fast transient response, good line, load regulation, no requirement for external pensation, and support low equivalent series resistance (ESR) output capacitors such as specialty polymer and ultra-low ESR ceramic capacitors. The TPS568230 provides plete Over-voltage, Under-voltage, Over-current, Over-temperature and Under-voltage lock-out protections. It is bined power good signal , output discharge function and large duty operation feature . TPS568230 is equipped with a MODE pin to select the desirable mode of operation. To attain high efficiency at light load, OOA mode and Advanced Eco-mode™ could be selected. OOA mode will not allow the part to go below...