Datasheet4U Logo Datasheet4U.com

TPS54329 - 3-A SYNCHRONOUS STEP-DOWN CONVERTER

General Description

The TPS54329 is an adaptive on-time D-CAP2™ mode synchronous buck converter.

TheTPS54329 enables system designers to complete the suite of various end equipment’s power bus regulators with a cost effective, low component count, low standby current solution.

Key Features

  • 1.
  • 23 D-CAP2™ Mode Enables Fast Transient Response.
  • Low Output Ripple and Allows Ceramic Output Capacitor.
  • Wide VIN Input Voltage Range: 4.5 V to 18 V.
  • Output Voltage Range: 0.76 V to 7.0 V.
  • Highly Efficient Integrated FETs Optimized for Lower Duty Cycle.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TPS54329 www.ti.com SLVSAZ6A – SEPTEMBER 2011 – REVISED MARCH 2012 4.5V to 18V Input, 3-A SYNCHRONOUS STEP DOWN CONVERTER Check for Samples: TPS54329 FEATURES 1 •23 D-CAP2™ Mode Enables Fast Transient Response • Low Output Ripple and Allows Ceramic Output Capacitor • Wide VIN Input Voltage Range: 4.5 V to 18 V • Output Voltage Range: 0.76 V to 7.0 V • Highly Efficient Integrated FETs Optimized for Lower Duty Cycle Applications – 100 mΩ (High Side) and 74 mΩ (Low Side) • High Efficiency, Less Than 10 μA at Shutdown • High Initial Bandgap Reference Accuracy • Adjustable Soft Start • Pre-Biased Soft Start • 650-kHz Switching Frequency (fSW) • Cycle By Cycle Over Current Limit DESCRIPTION The TPS54329 is an adaptive on-time D-CAP2™ mode synchronous buck converter.