Datasheet4U Logo Datasheet4U.com

TPS54020 - Synchronous Step-down Converter

Description

The TPS54020 is a 10-A, 4.5-V to 17-V input SWIFT converter.

The innovative 3.5-mm × 3.5-mm HotRod package optimizes high-density step-down designs.

The TPS54020 is a full-featured converter.

Features

  • 40°C to +150°C operating junction temperature range.
  • Integrated 8-mΩ and 6-mΩ MOSFETs.
  • Thermally-enhanced 3.5-mm × 3.5-mm HotRod™ package.
  • Peak-current-mode control.
  • Eco-mode™ pulse skip for higher efficiency.
  • Overcurrent protection for both MOSFETs.
  • Selectable overcurrent protection schemes.
  • Selectable overcurrent protection levels.
  • Split power rail: 1.6 V to 17 V on PVIN.
  • 0.6-V voltage referenc.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS54540D High Efficiency Synchronous Step-down DCDCConverter tokmas
TPS54540DDAR High Efficiency Synchronous Step-down DCDCConverter tokmas
TPS534 Thermopile Detector PerkinElmer Optoelectronics
TPS535 Thermopile Detector PerkinElmer Optoelectronics
TPS-1 Single Chip Interface Solution Renesas

Other Datasheets by Texas Instruments

Part Number Description
TPS5402 NON-SYNCHRONOUS STEP-DOWN REGULATOR
TPS5401 Step-Down Converter
TPS54010 14-A Synchronous Step-Down Converter
TPS54010-EP 14-A OUTPUT SYNCHRONOUS BUCK PWM SWITCHER
TPS5403 NON-SYNCHRONOUS STEP-DOWN REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com TPS54020 SLVSB10F – JULY 2012 – REVISED NOVTEMPBSE5R42002200 SLVSB10F – JULY 2012 – REVISED NOVEMBER 2020 TPS54020 Small, 10-A, 4.5-V to 17-V input, SWIFT™ Synchronous Step-down Converter with Light-load Efficiency 1 Features • –40°C to +150°C operating junction temperature range • Integrated 8-mΩ and 6-mΩ MOSFETs • Thermally-enhanced 3.5-mm × 3.5-mm HotRod™ package • Peak-current-mode control • Eco-mode™ pulse skip for higher efficiency • Overcurrent protection for both MOSFETs • Selectable overcurrent protection schemes • Selectable overcurrent protection levels • Split power rail: 1.6 V to 17 V on PVIN • 0.6-V voltage reference with ±1% accuracy • 200-kHz to 1.
Published: |