Datasheet4U Logo Datasheet4U.com

TPS22919 - Self-Protected Load Switch

Description

The TPS22919 device is a small, single channel load switch with controlled slew rate.

The device contains an N-channel MOSFET that can operate over an input voltage range of 1.6 V to 5.5 V and can support a maximum continuous current of 1.5 A.

Features

  • 1 Input operating voltage range (VIN): 1.6 V to 5.5 V.
  • Maximum continuous current (IMAX): 1.5 A.
  • On-Resistance (RON):.
  • 5-V VIN: 89 mΩ (typical).
  • 3.6-V VIN: 90 mΩ (typical).
  • 1.8-V VIN: 105 mΩ (typical).
  • Output short protection (ISC): 3 A (typical).
  • Low power consumption:.
  • ON state (IQ): 8 µA (typical).
  • OFF state (ISD): 2 nA (typical).
  • Smart ON pin pull down (RPD):.
  • ON ≥ VIH (ION): 100 nA (m.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS20 high reliable pressure transmitter Konics
TPS232 Thermopile Sensor PerkinElmer Optoelectronics
TPS2398 -48V Hot Swap Controller ON Semiconductor
TPS2399 -48V Hot Swap Controller ON Semiconductor
TPS23B Thermopile Sensor PerkinElmer Optoelectronics

Other Datasheets by Texas Instruments

Part Number Description
TPS22919-Q1 Self-Protected Load Switch
TPS22910A Low On Resistance Load Switch
TPS22912C Low On Resistance Load Switch
TPS22913B Low On Resistance Load Switch
TPS22913C Low On Resistance Load Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community TPS22919 SLVSEN5B – OCTOBER 2018 – REVISED MAY 2019 TPS22919 5.5 V, 1.5 A, 90-mΩ Self-Protected Load Switch with Controlled Rise Time 1 Features •1 Input operating voltage range (VIN): 1.6 V to 5.5 V • Maximum continuous current (IMAX): 1.5 A • On-Resistance (RON): – 5-V VIN: 89 mΩ (typical) – 3.6-V VIN: 90 mΩ (typical) – 1.8-V VIN: 105 mΩ (typical) • Output short protection (ISC): 3 A (typical) • Low power consumption: – ON state (IQ): 8 µA (typical) – OFF state (ISD): 2 nA (typical) • Smart ON pin pull down (RPD): – ON ≥ VIH (ION): 100 nA (maximum) – ON ≤ VIL (RPD): 530 kΩ (typical) • Slow Turn ON timing to limit inrush current (tON): – 5.0 V Turn ON time (tON): 1.95 ms at 3.2 mV/μs – 3.