TPS2220B Datasheet | Texas Instruments

FEATURES - Single-Slot Switch: TPS2220B - Fast Current Limit Response Time - Fully Integrated VCC and VPP Switching for 3.3 V, 5 V, and 12 V - Meets Current PC Card™ Standards - Vpp Output Selection Independent of VCC - 12-V and 5-V Supplies Can Be Disabled - TTL-Logic patible Inputs - Short-Circuit and Thermal Protection - 24-Pin HTSSOP and 24-Pin SSOP - 140-µA (Typical) Quiescent Current from 3.3-V Input - Break-Before-Make Switching - Power-On Reset - -40°C to 85°C Operating Ambient Temperature Range APPLICATIONS - Notebook and Desktop puters - Bar Code Scanners - Digital Cameras - Set-Top Boxes - PDAs DESCRIPTION The TPS2220B power-interface switch provides an integrated power-management solution for single Card sockets. The device allows the controlled distribution of 3.3 V, 5 V, and 12 V to one card slot. The current-limiting and thermal-protection features eliminate the need for fuses. Current-limit reporting helps the user isolate a system fault. The switch r DS(on) and current-limit values have been set for the peak and average current requirements stated in the PC Card specification, and optimized for cost. Like the TPS2220A this device supports independent VPP/VCC switching. The TPS2220B is pin patible with the TPA2220A execept for pin 20 of the TPS2220B which has no connection. AVAILABLE OPTIONS TA -40°C to 85°C PACKAGED DEVICE PLASTIC SMALL OUTLINE (DB-24) (1) Power PAD™ PLASTIC SMALL OUTLINE (PWP-24) (1) TPS2220BDB TPS2220BPWP (1) The DB and PWP packages are also available taped and reeled. Add R suffix to device type (e.g., TPS2220BPWPR) for taped and reeled. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Power PAD is a trademark of Texas Instruments. PC Card is a trademark of PCMCIA (Personal puter Memory Card International Association). PRODUCTION DATA information...