Datasheet4U Logo Datasheet4U.com

TPS2211 - SINGLE-SLOT PC CARD POWER INTERFACE SWITCH

Description

The TPS2211 PC Card power-interface switch provides an integrated power-management solution for a single PC Card.

Features

  • a 3.3-V low-voltage mode that allows for 3.3-V switching without the need for 5 V. Bias power can be derived from either the 3.3-V or 5-V inputs. This facilitates low-power system designs such as sleep mode and pager mode where only 3.3 V is available. End equipment for the TPS2211 includes notebook computers, desktop computers, personal digital assistants (PDAs), digital cameras, and bar-code scanners.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS20 high reliable pressure transmitter Konics
TPS232 Thermopile Sensor PerkinElmer Optoelectronics
TPS2398 -48V Hot Swap Controller ON Semiconductor
TPS2399 -48V Hot Swap Controller ON Semiconductor
TPS23B Thermopile Sensor PerkinElmer Optoelectronics

Other Datasheets by Texas Instruments

Part Number Description
TPS2211A Single-Slot PC Card Power-Interface Switch
TPS2210A PC Card Power-Interface Switch
TPS2212 PARALLEL INTERFACE POWER SWITCH
TPS2214A Dual-Slot PC Card Power Switch
TPS2216 Dual-Slot PC Card Power-Interface Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TPS2211 SINGLE-SLOT PC CARD POWER INTERFACE SWITCH FOR PARALLEL PCMCIA CONTROLLERS SLVS156E – JULY 1997 – REVISED JANUARY 2001 D Fully Integrated VCC and Vpp Switching for Single-Slot PC Card Interface DB PACKAGE (TOP VIEW) D Low rDS(on) (90-mΩ 5-V VCC Switch and 3.3-V VCC Switch) D Compatible With Controllers From Cirrus, Ricoh, O2Micro, Intel, and Texas Instruments D 3.3-V Low-Voltage Mode D Meets PC Card Standards D 12-V Supply Can Be Disabled Except During 12-V Flash Programming D Short-Circuit and Thermal Protection D Space-Saving 16-Pin SSOP (DB) D Compatible With 3.3-V, 5-V, and 12-V PC Cards D Break-Before-Make Switching VCCD0 VCCD1 3.3V 3.