Datasheet4U Logo Datasheet4U.com

TPIC2404 - INTELLIGENT-POWER QUAD LOW-SIDE SWITCH

Description

The tab is electrically connected to the GND pins.

Features

  • four inverting open-collector outputs controlled by a common-enable input. When ENABLE is low, the outputs are disabled. An error-sensing circuit monitors load and device faults. When an error is sensed, the FAULT output goes to a low state. In addition, the device features on-board VCC overvoltage and thermal overload protection circuits, and the outputs are current limit protected.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPI Tripolar protection STMicroelectronics
TPI-0805MH Multilayer Ceramic SMD Varistor ETC
TPI-0805ML Multilayer Ceramic SMD Varistor ETC
TPI-1206MH Multilayer Ceramic SMD Varistor ETC
TPI-1812MH Multilayer Ceramic SMD Varistor ETC

Other Datasheets by Texas Instruments

Part Number Description
TPIC2401 4-CHANNEL COMMON-SOURCE POWER DMOS ARRAY
TPIC2406 INTELLIGENT-POWER QUAD MOSFET LATCH
TPIC2010 Serial I/F Controlled 9-Channel Motor-Driver
TPIC2030 Serial I/F Controlled 7-Channel Motor-Driver
TPIC2040 Serial I/F Controlled 7-Channel Motor-Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ą TPIC2404 INTELLIGENTĆPOWER QUAD LOWĆSIDE SWITCH ą SLIS007A − D3299, AUGUST 1989 − REVISED MAY 1993 • 1-A Current Capability Per Channel • 45-V Inductive Switching Voltage Capability • Current Sink Inputs Compatible With TTL or CMOS Devices • Output Clamp Diodes for Inductive Transient Protection • Independent Thermal Shutdown Protection • Overvoltage Shutdown Protection • Independent Channel Current Limit • Error Sensing • Extended Temperature Range of −40°C to 125°C description KN PACKAGE (TOP VIEW) 15 14 GND 4A 13 4Y 12 3, 4 CLAMP 11 3Y 10 3A 9 ENABLE 8 GND 7 VCC 6 2A 5 2Y 4 1, 2 CLAMP 3 1Y 2 1A 1 FAULT The TPIC2404 is a monolithic high-voltage The tab is electrically connected to the GND pins.
Published: |