TMS320F2800154-Q1 Datasheet | Texas Instruments

Features - 32-bit lockstep dual-TMS320C28x core at 120MHz - IEEE 754 Floating-Point Unit (FPU) - Trigonometric Math Unit (TMU) - CRC Engine and Instructions (VCRC) - On-chip memory - 256KB (128KW) of single bank flash (ECCprotected) - 36KB (18KW) of RAM (ECC/Parity-protected) - Security - JTAGLOCK - Zero-pin boot - Dual-zone security - Clock and system control - Two internal 10MHz oscillators - Crystal oscillator or external clock input - Windowed watchdog timer module - Missing clock detection circuitry - Dual-clock parator (DCC) - 1.2V core, 3.3V I/O design - Internal VREG for 1.2V generation - Brownout reset (BOR) circuit - System peripherals - 52 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins (11 shared with Analog) - 10 digital inputs on analog pins - Enhanced Peripheral Interrupt Expansion (e PIE) - Multiple low-power mode (LPM) support - Unique Identification (UID) number - munications peripherals - One Power-Management Bus (PMBus) interface - Two Inter-integrated Circuit (I2C) interfaces - One Controller Area Network (CAN/DCAN) bus port - One Controller Area Network with Flexible Data-Rate (CAN FD/MCAN) bus port - One Serial Peripheral Interface (SPI) ports - Three UART-patible Serial munication Interface (SCI) - One UART-patible Local Interconnect Network (LIN) interfaces - Analog...