TLC2254A-EP
TLC2254A-EP is RAIL-TO-RAIL VERY LOW-POWER OPERATIONAL AMPLIFIERS manufactured by Texas Instruments.
- Part of the TLC2252-EP comparator family.
- Part of the TLC2252-EP comparator family.
LC2254 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC225x family consumes only 35 µA of supply current per channel. This micropower operation makes them good choices for battery-powered applications. The noise performance has been dramatically improved over previous generations of CMOS amplifiers. Looking at Figure 1, the TLC225x has a noise level of 19 n V/√Hz at 1k Hz; four times lower than petitive micropower solutions.
EQUIVALENT INPUT NOISE VOLTAGE vs
FREQUENCY 60
VDD = 5 V RS = 20 Ω 50 TA = 25°C
The TLC225x amplifiers, exhibiting high input
10 impedance and low noise, are excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers.
0 101 10 2 10 3 10 4
Because of the micropower dissipation levels, f
- Frequency
- Hz these devices work well in hand-held monitoring and remote-sensing applications. In addition, the
Figure 1 rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC225x A family is available and has a maximum input offset voltage of 850 µV. This family is fully characterized at 5 V and ± 5 V.
Please be aware that an important notice concerning availability, standard warranty, and use in...
