Datasheet4U Logo Datasheet4U.com

TL3016Y - Ultra-Fast Low-Power Precision Comparator

Download the TL3016Y datasheet PDF. This datasheet also covers the TL3016 variant, as both devices belong to the same ultra-fast low-power precision comparator family and are provided as variant models within a single manufacturer datasheet.

General Description

The TL3016 is an ultrafast comparator designed to interface directly to TTL logic while operating from either a single 5-V power supply or dual ± 5-V supplies.

Key Features

  • extremely tight offset voltage and high gain for precision.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (TL3016-etcTI.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
TL300 Network Internet Alarm Communicator T-Link
TL3145 Tact Switch E-SWITCH
TL3210 Tact Switch E-Switch
tl3215 tact Switch E-Switch
TL3240 tact Switch E-Switch

Other Datasheets by Texas Instruments

Part Number Description
TL3016 Ultra-Fast Low-Power Precision Comparator
TL3116 Ultra-Fast Low-Power Precision Comparator
TL3116Y Ultra-Fast Low-Power Precision Comparator
TL317 3-Terminal Adjustable Regulator
TL32088 Differential Analog Buffer Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
D Ultrafast Operation . . . 7.6 ns (Typ) D Low Positive Supply Current 10.6 mA (Typ) D Operates From a Single 5-V Supply or From a Split ± 5-V Supply D Complementary Outputs D Low Offset Voltage D No Minimum Slew Rate Requirement D Output Latch Capability D Functional Replacement to the LT1016 description The TL3016 is an ultrafast comparator designed to interface directly to TTL logic while operating from either a single 5-V power supply or dual ± 5-V supplies. It features extremely tight offset voltage and high gain for precision applications. It has complementary outputs that can be latched using the LATCH ENABLE terminal. Figure 1 shows the positive supply current of this comparator. The TL3016 only requires 10.6 mA (typical) to achieve a propagation delay of 7.6 ns.