Datasheet4U Logo Datasheet4U.com

THS4524-EP - Fully Differential Amplifier

Description

The THS4524 is a very low-power, fully differential operational amplifier with rail-to-rail output and an input common-mode range that includes the negative rail.

Features

  • 1.
  • 23 Fully Differential Architecture.
  • Bandwidth: 145 MHz.
  • Slew Rate: 490 V/μs.
  • HD2:.
  • 133 dBc at 10 kHz (1 VRMS, RL = 1 kΩ).
  • HD3:.
  • 140 dBc at 10 kHz (1 VRMS, RL = 1 kΩ).
  • Input Voltage Noise: 4.6 nV/√Hz (f = 100 kHz).
  • THD+N:.
  • 112dBc (0.00025%) at 1 kHz (22-kHz BW, G = 1, 5 VPP).
  • Open-Loop Gain: 119 dB.
  • NRI.
  • Negative Rail Input.
  • RRO.
  • Rail-to-Rail Output.
  • Output Co.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
THS-56 Magnetic Direct Current Sensor MDCS NEC
THS-56F Magnetic Direct Current Sensor MDCS NEC
THS-63F Magnetic Direct Current Sensor MDCS NEC
THS-65 Magnetic Direct Current Sensor MDCS NEC
THS102A Hall Sensor Toshiba

Other Datasheets by Texas Instruments

Part Number Description
THS4524 Fully Differential Amplifier
THS4520 LOW DISTORTION FULLY DIFFERENTIAL AMPLIFIER
THS4521 Fully Differential Amplifier
THS4521-HT Fully Differential Amplifier
THS4522 Fully Differential Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com THS4524-EP SBOS609A – JUNE 2012 – REVISED AUGUST 2013 VERY LOW POWER, NEGATIVE RAIL INPUT, RAIL-TO-RAIL OUTPUT, FULLY DIFFERENTIAL AMPLIFIER Check for Samples: THS4524-EP FEATURES 1 •23 Fully Differential Architecture • Bandwidth: 145 MHz • Slew Rate: 490 V/μs • HD2: –133 dBc at 10 kHz (1 VRMS, RL = 1 kΩ) • HD3: –140 dBc at 10 kHz (1 VRMS, RL = 1 kΩ) • Input Voltage Noise: 4.6 nV/√Hz (f = 100 kHz) • THD+N: –112dBc (0.00025%) at 1 kHz (22-kHz BW, G = 1, 5 VPP) • Open-Loop Gain: 119 dB • NRI—Negative Rail Input • RRO—Rail-to-Rail Output • Output Common-Mode Control (With Low Offset and Drift) • Power Supply: – Voltage: +2.5 V (±1.25 V) to +5.5 V (±2.75 V) – Current: 1.
Published: |