Datasheet4U Logo Datasheet4U.com

SN75518 - Vacuum Fluorescent Display Drivers

Description

The SN65518 and SN75518 are monolithic BIDFET† integrated circuits designed to drive a dot matrix or segmented vacuum fluorescent display.

Each device consists of a 32-bit shift register, 32 latches, and 32 output AND gates.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN755723FT CMOS 40-Bit Anode/Grid Driver ETC
SN755864APZP SN755864APZP ETC
SN755866PZP SN755866PZP ETC
SN755870KPZT Plasma Display Panel IC ETC
SN7500 Pulse Width Modulation KODENSHI

Other Datasheets by Texas Instruments

Part Number Description
SN75512B Vacuum Fluorescent Display Drivers
SN75512C Vacuum Fluorescent Display Drivers
SN75555 Electroluminescent Column Drivers
SN75556 Electroluminescent Column Drivers
SN75061 Driver-Receiver Pair

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ą • Each Device Drives 32 Lines • 60-V Output Voltage Swing Capability • 25-mA Output Source Current Capability • High-Speed Serially Shifted Data Input • Latches on All Driver Outputs description The SN65518 and SN75518 are monolithic BIDFET† integrated circuits designed to drive a dot matrix or segmented vacuum fluorescent display. Each device consists of a 32-bit shift register, 32 latches, and 32 output AND gates. Serial data is entered into the shift register on the low-to-high transition of CLOCK. While LATCH ENABLE is high, parallel data is transferred to the output buffers through a 32-bit latch. Data present in the latch during the high-to-low transition of LATCH ENABLE is latched. When STROBE is low, all Q outputs are enabled. When STROBE is high, all Q outputs are low.
Published: |