Datasheet4U Logo Datasheet4U.com

SN75512C - Vacuum Fluorescent Display Drivers

Description

The SN65512C and SN75512C are monolithic BIDFET† integrated circuits designed to drive a dot matrix or segmented vacuum fluorescent display.

All device inputs are diode-clamped pnp inputs and assume a high logic level when open circuited.

The nominal input threshold is 1.5 V.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN755723FT CMOS 40-Bit Anode/Grid Driver ETC
SN755864APZP SN755864APZP ETC
SN755866PZP SN755866PZP ETC
SN755870KPZT Plasma Display Panel IC ETC
SN7500 Pulse Width Modulation KODENSHI

Other Datasheets by Texas Instruments

Part Number Description
SN75512B Vacuum Fluorescent Display Drivers
SN75518 Vacuum Fluorescent Display Drivers
SN75555 Electroluminescent Column Drivers
SN75556 Electroluminescent Column Drivers
SN75061 Driver-Receiver Pair

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ą • Each Device Drives 12 Lines • 60-V Output Voltage Swing Capability • 25-mA Output Source Current Capability • High-Speed Serially-Shifted Data Input • TTL-Compatible Inputs • Latches on All Driver Outputs description The SN65512C and SN75512C are monolithic BIDFET† integrated circuits designed to drive a dot matrix or segmented vacuum fluorescent display. All device inputs are diode-clamped pnp inputs and assume a high logic level when open circuited. The nominal input threshold is 1.5 V. Outputs are totem-pole structures formed by an npn emitter follower and double-diffused MOS (DMOS) transistors. The device consists of a 12-bit shift register, 12 latches, and 12 output AND gates. Serial data is entered into the shift register on the low-to-high transition of CLOCK.
Published: |