SN74LVC1T45-Q1
Description
The SN74LVC1T45-Q1 device is a single-bit, noninverting bus transceiver that uses two separate configurable power supply rails. The A-port is designed to track VCCA.
Key Features
- Qualified for automotive applications
- Fully configurable dual-rail design allows each port to operate over the full 1.65-V to 5.5-V powersupply range
- VCC isolation feature – if either VCC input is at GND, both ports are in the high-impedance state
- DIR input circuit referenced to VCCA
- ±24-mA output drive at 3.3 V
- Ioff supports partial-power-down mode operation
