Datasheet4U Logo Datasheet4U.com

SN74LVC1G3208 - Single 3-Input Positive OR-AND Gate

Description

This device is designed for 1.65-V to 5.5-V VCC operation.

The SN74LVC1G3208 device is a single 3-input positive OR-AND gate.

C in positive logic.

By tying one input to GND or VCC, the SN74LVC1G3208 device offers two more functions.

Features

  • 1.
  • 2 Available in the Texas Instruments NanoStar™ and NanoFree™ Packages.
  • Supports 5-V VCC Operation.
  • Inputs Accept Voltages to 5.5 V.
  • Provides Down Translation to VCC.
  • Max tpd of 5 ns at 3.3 V.
  • Low Power Consumption, 10-µA Max ICC.
  • ±24-mA Output Drive at 3.3 V.
  • Input Hysteresis Allows Slow Input Transition and Better Switching Noise Immunity at the Input (Vhys = 250 mV Typ @ 3.3 V).
  • Can Be Used in Three Combinations.

📥 Download Datasheet

📁 Similar Datasheet

  • SN74LVC1G34 - Single buffer (UMW)
  • SN74LVC1G125 - high performance non-inverting buffer (UMW)
  • SN74L71 - AND-Gate R-S Master-Slave F-F (National Semiconductor)
  • SN74L74N - Dual D-Type Flip-Flop (ETC)
  • SN74LS00 - QUAD 2-INPUT NAND GATE (Motorola)
  • SN74LS00 - Quad 2-Input NAND Gate (ON Semiconductor)
  • SN74LS02 - QUAD 2-INPUT NOR GATE (Motorola)
  • SN74LS02 - QUAD 2-INPUT NOR GATE (ON Semiconductor)
  • SN74LS04 - Hex Inverter (ON Semiconductor)
  • SN74LS04 - HEX INVERTER (Motorola)
Other Datasheets by Texas Instruments

Full PDF Text Transcription

Click to expand full text
SN74LVC1G3208 www.ti.com SCES605B – SEPTEMBER 2004 – REVISED DECEMBER 2013 Single 3-Input Positive OR-AND Gate Check for Samples: SN74LVC1G3208 FEATURES 1 •2 Available in the Texas Instruments NanoStar™ and NanoFree™ Packages • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Provides Down Translation to VCC • Max tpd of 5 ns at 3.3 V • Low Power Consumption, 10-µA Max ICC • ±24-mA Output Drive at 3.3 V • Input Hysteresis Allows Slow Input Transition and Better Switching Noise Immunity at the Input (Vhys = 250 mV Typ @ 3.
Published: |