Datasheet4U Logo Datasheet4U.com

SN74LV374A-EP - Octal Edge-Triggered D-Type Flip-Flop

Datasheet Summary

Description

The SN74LV374A is an octal edge-triggered D-type flip-flop designed for 2-V to 5.5-V VCC operation.

Features

  • 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels set up at the data (D) inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or high-impe.

📥 Download Datasheet

Datasheet preview – SN74LV374A-EP

Datasheet Details

Part number SN74LV374A-EP
Manufacturer Texas Instruments
File Size 693.97 KB
Description Octal Edge-Triggered D-Type Flip-Flop
Datasheet download datasheet SN74LV374A-EP Datasheet
Additional preview pages of the SN74LV374A-EP datasheet.
Other Datasheets by Texas Instruments

Full PDF Text Transcription

Click to expand full text
SN74LV374AĆEP OCTAL EDGEĆTRIGGERED DĆTYPE FLIPĆFLOP WITH 3ĆSTATE OUTPUTS SCLS500A − MAY 2003 − REVISED MAY 2004 D Controlled Baseline − One Assembly/Test Site, One Fabrication Site D Extended Temperature Performance of −40°C to 105°C D Enhanced Diminishing Manufacturing Sources (DMS) Support D Enhanced Product-Change Notification D Qualification Pedigree† D Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C D Typical VOHV (Output VOH Undershoot) >2.3 V at VCC = 3.3 V, TA = 25°C D Supports Mixed-Mode Voltage Operation on All Ports † Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range.
Published: |