Datasheet4U Logo Datasheet4U.com

SN74CBT162292 - 12-Bit 1-of-2 FET Multiplexer/Demultiplexer

General Description

The SN74CBT162292 is a 12-bit 1-of-2 high-speed TTL-compatible FET multiplexer/ demultiplexer.

The low on-state resistance of the switch allows connections to be made with minimal propagation delay.

When the select (S) input is low, port A is connected to port B1, and RINT is connected to port B2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74C74N Dual D-Type Flip-Flop ETC
SN74101 AND-OR Gate ETC
SN74102 AND Gate ETC
SN74103 Dual J-K Flip-Flop ETC
SN74106 Dual J-K Flip-Flop ETC

Other Datasheets by Texas Instruments

Part Number Description
SN74CBT16210 20-BIT FET BUS SWITCH
SN74CBT16210C 20-BIT FET BUS SWITCH
SN74CBT16211A 24-BIT FET BUS SWITCH
SN74CBT16211C 24-BIT FET BUS SWITCH
SN74CBT16212A 24-BIT FET BUS-EXCHANGE SWITCHES

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN74CBT162292 12-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER WITH INTERNAL PULLDOWN RESISTORS SCDS052E – MARCH 1998 – REVISED OCTOBER 2000 D Member of Texas Instruments’ Widebus™ Family D TTL-Compatible Control Input Levels D Isolation Under Power-Off Conditions D Make-Before-Break Feature D Internal 500-Ω Pulldown Resistors to Ground D A-Port Inputs/Outputs Have Equivalent 25-Ω Series Resistors, So No External Resistors Are Required D Latch-Up Performance Exceeds 250 mA Per JESD 17 description The SN74CBT162292 is a 12-bit 1-of-2 high-speed TTL-compatible FET multiplexer/ demultiplexer. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. When the select (S) input is low, port A is connected to port B1, and RINT is connected to port B2.