Datasheet4U Logo Datasheet4U.com

SN74AVCBH324245 - 32-BIT DUAL-SUPPLY BUS TRANSCEIVER

Description

This 32-bit noninverting bus transceiver uses two separate configurable power-supply rails.

The A port is designed to track VCCA.

VCCA accepts any supply voltage from 1.4 V to 3.6 V.

Features

  • Member of the Texas Instruments Widebus+™ Family.
  • DOC™ Circuitry Dynamically Changes Output Impedance, Resulting in Noise Reduction Without Speed Degradation.
  • Dynamic Drive Capability Is Equivalent to Standard Outputs With IOH and IOL of.
  • ±24 mA at 3-V VCC.
  • ±15 mA at 2.3-V VCC.
  • ±9 mA at 1.65-V VCC.
  • ±6 mA at 1.4-V VCC.
  • Control Inputs VIH/VIL Levels Are Referenced to VCCB Voltage.
  • If Either VCC Input Is at GND, Both.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74101 AND-OR Gate ETC
SN74102 AND Gate ETC
SN74103 Dual J-K Flip-Flop ETC
SN74106 Dual J-K Flip-Flop ETC
SN74108 Dual J-K Flip Flop ETC

Other Datasheets by Texas Instruments

Part Number Description
SN74AVCBH164245 16-BIT DUAL-SUPPLY BUS TRANSCEIVER
SN74AVCB164245 16-BIT DUAL-SUPPLY BUS TRANSCEIVER
SN74AVCB164245-EP 16-BIT DUAL-SUPPLY BUS TRANSCEIVER
SN74AVCB164245-Q1 16-BIT DUAL-SUPPLY BUS TRANSCEIVER
SN74AVCB324245 32-BIT DUAL-SUPPLY BUS TRANSCEIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com SN74AVCBH324245 32-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS SCES550B – FEBRUARY 2004 – REVISED JUNE 2005 FEATURES • Member of the Texas Instruments Widebus+™ Family • DOC™ Circuitry Dynamically Changes Output Impedance, Resulting in Noise Reduction Without Speed Degradation • Dynamic Drive Capability Is Equivalent to Standard Outputs With IOH and IOL of – ±24 mA at 3-V VCC – ±15 mA at 2.3-V VCC – ±9 mA at 1.65-V VCC – ±6 mA at 1.4-V VCC • Control Inputs VIH/VIL Levels Are Referenced to VCCB Voltage • If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State • Inputs/Outputs Can Tolerate up to 4.
Published: |