Datasheet4U Logo Datasheet4U.com

SN74ACT533 - OCTAL TRANSPARENT D-TYPE LATCHES

Description

The ’ACT533 devices are octal transparent D-type latches with 3-state outputs.

When the latch-enable (LE) input is high, the Q outputs follow the complements of the data (D) inputs.

When LE is taken low, the Q outputs are latched at the inverted levels set up at the D inputs.

📥 Download Datasheet

📁 Similar Datasheet

  • SN74101 - AND-OR Gate (ETC)
  • SN74102 - AND Gate (ETC)
  • SN74103 - Dual J-K Flip-Flop (ETC)
  • SN74106 - Dual J-K Flip-Flop (ETC)
  • SN74108 - Dual J-K Flip Flop (ETC)
  • SN7411 - Triple 3-Input AND (ETC)
  • SN74120 - Dual Pulse Synchronizers / Drivers (Texas Instruments Inc)
  • SN74124 - Dual Voltage Controlled Oscillators (ETC)
  • SN7415 - Triple 3 Input AND Gate (Motorola)
  • SN74381 - integrated circuits (ETC)
Other Datasheets by Texas Instruments

Full PDF Text Transcription

Click to expand full text
SN54ACT533, SN74ACT533 OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS SCAS553C – NOVEMBER 1995 – REVISED OCTOBER 2002 D 4.5-V to 5.5-V VCC Operation D Inputs Accept Voltages to 5.5 V D Max tpd of 11 ns at 5 V D Inputs Are TTL-Voltage Compatible D 3-State Inverting Outputs Drive Bus Lines Directly description/ordering information The ’ACT533 devices are octal transparent D-type latches with 3-state outputs. When the latch-enable (LE) input is high, the Q outputs follow the complements of the data (D) inputs. When LE is taken low, the Q outputs are latched at the inverted levels set up at the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state.
Published: |