SN74AC573 Datasheet | Texas Instruments

Features - Operation of 2V to 6V V CC - Inputs accept voltages to 6V - Maximum tpd of 9ns at 5V - 3-State outputs drive bus lines directly 2 Applications - Buffer registers - Bidirectional bus drivers - Working registers 3 Description These 8-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. PART NUMBER SN74AC573 Package Information PACKAGE(1) PACKAGE SIZE(2) RKS (VQFN, 20) 4.5 mm × 2.5 mm DB (SSOP, 20) 7.2 mm × 7.8 mm DGV (TVSOP, 20) 5 mm × 6.4 mm DW (SOIC, 20) 12.8 mm × 10.3 mm NS (SOP, 20) 12.6 mm × 7.8 mm N (PDIP, 20) 24.33 mm × 9.4 mm PW (TSSOP, 20) 6.5 mm × 6.4 mm BODY SIZE(3) 4.5mm × 2.5mm 7.2mm x 5.30mm 5mm × 4.4mm 12.80mm x 7.50mm 12.6mm x 5.3mm 24.33mm x 6.35mm 6.50mm x 4.40mm (1) For more information, see Section 11. (2) The package size (length × width) is a nominal value and includes pins, where applicable. (3) The body size (length × width) is a nominal value and does not include pins. Logic Diagram (Positive Logic) An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION DATA. SCAS542H - OCTOBER 1995 - REVISED FEBRUARY 2024 .ti. Table of Contents 1 Features 1 2 Applications 1 3 Description 1 4 Pin Configuration and Functions 3 5 Specifications 4 5.1 Absolute Maximum Ratings 4...