SN74165 Datasheet | Texas Instruments

The SN54165 and SN74165 devices are obsolete and are no longer supplied. SN54165, SN54LS165A, SN74165, SN74LS165A PARALLEL-LOAD 8-BIT SHIFT REGISTERS SDLS062D - OCTOBER 1976 - REVISED FEBRUARY 2002 D plementary Outputs D Direct Overriding Load (Data) Inputs D Gated Clock Inputs D Parallel-to-Serial Data Conversion TYPE ’165 ’LS165A TYPICAL MAXIMUM CLOCK FREQUENCY 26 MHz 35 MHz TYPICAL POWER DISSIPATION 210 m W 90 m W description The ’165 and ’LS165A are 8-bit serial shift registers that shift the data in the direction of QA toward QH when clocked. Parallel-in access to each stage is made available by eight individual, direct data inputs that are enabled by a low level at the shift/load (SH/LD) input. These registers also feature gated clock (CLK) inputs and plementary outputs from the eighth bit. All inputs are diode-clamped to minimize transmission-line effects, thereby simplifying system design. Clocking is acplished through a two-input positive-NOR gate, permitting one input to be used as a clock-inhibit function. Holding either of the clock inputs high inhibits clocking, and holding either clock input low with SH/LD high enables the other clock input. Clock inhibit (CLK INH) should be changed to the high level only while CLK is high. Parallel loading is inhibited as long as SH/LD is high. Data at the parallel inputs are loaded directly into the register while SH/LD is low, independently of the levels of CLK, CLK INH, or serial (SER) inputs. SN54165, SN54LS165A . . . J OR W PACKAGE SN74165 . . . N PACKAGE SN74LS165A . . . D, N, OR NS PACKAGE (TOP VIEW) SH/LD CLK E F G H QH GND 1 2 3 4 5 6 7 8 16 VCC 15 CLK INH 14 D 13 C 12 B 11 A 10 SER 9 QH SN54LS165A . . . FK PACKAGE (TOP VIEW) CLK SH/LD NC VCC CLK INH 3 2 1 20 19 E4 18 D F5 17 C NC 6 16 NC G7 15...