Datasheet4U Logo Datasheet4U.com

SN65LVCP408 - Gigabit 8x8 CROSSPOINT SWITCH

Description

The SN65LVCP408 is a 8 × 8 non-blocking crosspoint switch in a flow-through pin-out allowing for ease in PCB layout.

VML signaling is used to achieve a high-speed data throughput while using low power.

Features

  • 1.
  • 23 Up to 4.25 Gbps Operation.
  • Non-Blocking Architecture Allows Each Output to be Connected to Any Input.
  • 30 ps of Deterministic Jitter.
  • Selectable Transmit Pre-Emphasis Per Lane.
  • Selectable Receive Equalization.
  • Available Packaging 64 Pin QFP.
  • Propagation Delay Times: 500 ps Typical.
  • Inputs Electrically Compatible With CML Signal Levels.
  • Operates From a Single 3.3-V Supply.
  • Ability to 3-STATE Outputs.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN65004 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65007 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65010 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65012 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65016 One Channel Direct Drive Speech Controller SONiX Technology Company

Other Datasheets by Texas Instruments

Part Number Description
SN65LVCP40 DC TO 4-GBPS DUAL 1:2 MULTIPLEXER/REPEATER/EQUALIZER
SN65LVCP402 Gigabit 2x2 CROSSPOINT SWITCH
SN65LVCP404 Gigabit 4x4 CROSSPOINT SWITCH
SN65LVCP418 8-Channel Gigabit Signal Conditioning Buffer
SN65LVCP114 14.2-Gbps Quad 1:2-2:1 Mux Linear-Redriver

Full PDF Text Transcription

Click to expand full text
SN65LVCP408 www.ti.com SLLS842A – JUNE 2009 – REVISED JUNE 2010 Gigabit 8 x 8 CROSSPOINT SWITCH Check for Samples: SN65LVCP408 FEATURES 1 •23 Up to 4.25 Gbps Operation • Non-Blocking Architecture Allows Each Output to be Connected to Any Input • 30 ps of Deterministic Jitter • Selectable Transmit Pre-Emphasis Per Lane • Selectable Receive Equalization • Available Packaging 64 Pin QFP • Propagation Delay Times: 500 ps Typical • Inputs Electrically Compatible With CML Signal Levels • Operates From a Single 3.3-V Supply • Ability to 3-STATE Outputs • Integrated Termination Resistors • I2C™ Control Interface DESCRIPTION The SN65LVCP408 is a 8 × 8 non-blocking crosspoint switch in a flow-through pin-out allowing for ease in PCB layout.
Published: |