Datasheet4U Logo Datasheet4U.com

SN65HVD50 - High Output Full-Duplex RS-485 Drivers and Receivers

General Description

The SN65HVD5X devices are 3-state differential line drivers and differential-input line receivers that operate with a 5-V power supply.

Each driver and receiver has separate input and output pins for full-duplex bus communication designs.

Key Features

  • 1/8 Unit-load option available (up to 256 nodes on the bus).
  • Bus-pin ESD protection exceeds 15 kV HBM.
  • Optional driver output transition times for signaling rates(1) of 1 Mbps, 5 Mbps and 25 Mbps.
  • Low-current standby mode < 1 μA.
  • Glitch-free power-up and power-down bus I/Os.
  • Bus idle, open, and short circuit failsafe.
  • Designed for RS-422 and RS485 networks.
  • 3.3-V Devices available, SN65HVD30-35 1 2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN65004 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65007 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65010 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65012 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65016 One Channel Direct Drive Speech Controller SONiX Technology Company

Other Datasheets by Texas Instruments

Part Number Description
SN65HVD51 High Output Full-Duplex RS-485 Drivers and Receivers
SN65HVD52 High Output Full-Duplex RS-485 Drivers and Receivers
SN65HVD53 High Output Full-Duplex RS-485 Drivers and Receivers
SN65HVD54 High Output Full-Duplex RS-485 Drivers and Receivers
SN65HVD55 High Output Full-Duplex RS-485 Drivers and Receivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN65HVD50, SN65HVD51, SN65HVD52 SN65HVD53, SN65HVD54, SN65HVD55 SLLS666F – SEPTEMBER 2005 – REVISED MARCH 2023 SN65HVD5x High Output Full-Duplex RS-485 Drivers and Receivers 1 Features • 1/8 Unit-load option available (up to 256 nodes on the bus) • Bus-pin ESD protection exceeds 15 kV HBM • Optional driver output transition times for signaling rates(1) of 1 Mbps, 5 Mbps and 25 Mbps • Low-current standby mode < 1 μA • Glitch-free power-up and power-down bus I/Os • Bus idle, open, and short circuit failsafe • Designed for RS-422 and RS485 networks • 3.