Datasheet4U Logo Datasheet4U.com

SN54HCT32 - QUADRUPLE 2-INPUT POSITIVE-OR GATES

Description

The SNx4HCT32 device contains four independent 2-input OR gates.

They perform the Boolean function Y = A + B in positive logic.

Features

  • Operating voltage range of 4.5 V to 5.5 V.
  • Outputs can drive up to 10 LSTTL loads.
  • Low power consumption, 20-µA max ICC.
  • Typical tpd = 13 ns.
  • ±4-mA output drive at 5 V.
  • Low input current of 1 µA max.
  • Inputs are TTL-Voltage compatible xA 2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN54HC595J 16-bit bus transceiver and transparant D-type latch nexperia
SN54LS00 QUAD 2-INPUT NAND GATE Motorola Inc
SN54LS01 QUAD 2-INPUT NAND GATE Motorola Inc
SN54LS02 QUAD 2-INPUT NOR GATE Motorola Inc
SN54LS03 QUAD 2-INPUT NAND GATE Motorola Inc

Other Datasheets by Texas Instruments

Part Number Description
SN54HCT373 Octal Transparent D-Type Latches
SN54HCT373J Octal Transparent D-Type Latches
SN54HCT374 OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
SN54HCT377 OCTAL D-TYPE FLIP-FLOPS
SN54HCT00 QUADRUPLE 2-INPUT POSITIVE-NAND GATE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN54HCT32, SN74HCT32 SCLS064G – NOVEMBER 1988 – REVISED OCTOBER 2022 SNx4HCT32 Quadruple 2-Input Positive-OR Gates 1 Features • Operating voltage range of 4.5 V to 5.5 V • Outputs can drive up to 10 LSTTL loads • Low power consumption, 20-µA max ICC • Typical tpd = 13 ns • ±4-mA output drive at 5 V • Low input current of 1 µA max • Inputs are TTL-Voltage compatible xA 2 Description The SNx4HCT32 device contains four independent 2-input OR gates. They perform the Boolean function Y = A + B in positive logic. PART NUMBER SN74HCT32D SN74HCT32DBR SN74HCT32N SN74HCT32NSR SN74HCT32PW Device Information PACKAGE(1) BODY SIZE (NOM) SOIC (14) 8.65 mm × 3.90 mm SSOP (14) 6.20 mm × 5.30 mm PDIP (14) 19.31 mm × 6.35 mm SO (14) 10.20 mm × 5.30 mm TSSOP (14) 5.00 mm × 4.