Datasheet4U Logo Datasheet4U.com

SN54HC153J - Dual 4-Line To 1-Line Data Selectors/Multiplexers

Download the SN54HC153J datasheet PDF. This datasheet also covers the SN54HC153 variant, as both devices belong to the same dual 4-line to 1-line data selectors/multiplexers family and are provided as variant models within a single manufacturer datasheet.

General Description

The SNx4HC153 is a dual data selector/multiplexer containing full binary decoding to select one of four data sources.

Both channels are controlled by the same address select inputs, and each channel includes its own strobe (G) input.

Key Features

  • Wide operating voltage range of 2 V to 6 V.
  • Outputs can drive up to 15 LSTTL loads.
  • Low power consumption, 80-μA max ICC.
  • Typical tpd = 9 ns.
  • ±6-mA output drive at 5 V.
  • Low input current of 1 μA max.
  • Permit multiplexing from n lines to one line.
  • Perform parallel-to-serial conversion.
  • Strobe (enable) line provided for cascading (N lines to n lines) 2.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (SN54HC153-etcTI.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
SN54HC595J 16-bit bus transceiver and transparant D-type latch nexperia
SN54LS00 QUAD 2-INPUT NAND GATE Motorola Inc
SN54LS01 QUAD 2-INPUT NAND GATE Motorola Inc
SN54LS02 QUAD 2-INPUT NOR GATE Motorola Inc
SN54LS03 QUAD 2-INPUT NAND GATE Motorola Inc

Other Datasheets by Texas Instruments

Part Number Description
SN54HC153 Dual 4-Line To 1-Line Data Selectors/Multiplexers
SN54HC151 8-Line To 1-Line Data Selectors/Multiplexers
SN54HC151J 8-Line To 1-Line Data Selectors/Multiplexers
SN54HC157 Quadruple 2-Line to 1-Line Data Selectors/Multiplexers
SN54HC157J Quadruple 2-Line to 1-Line Data Selectors/Multiplexers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN54HC153, SN74HC153 SCLS112E – DECEMBER 1982 – REVISED FEBRUARY 2022 SNx4HC153 Dual 4-Line To 1-Line Data Selectors/Multiplexers 1 Features • Wide operating voltage range of 2 V to 6 V • Outputs can drive up to 15 LSTTL loads • Low power consumption, 80-μA max ICC • Typical tpd = 9 ns • ±6-mA output drive at 5 V • Low input current of 1 μA max • Permit multiplexing from n lines to one line • Perform parallel-to-serial conversion • Strobe (enable) line provided for cascading (N lines to n lines) 2 Description The SNx4HC153 is a dual data selector/multiplexer containing full binary decoding to select one of four data sources. Both channels are controlled by the same address select inputs, and each channel includes its own strobe (G) input.