Datasheet4U Logo Datasheet4U.com

SN54ALVTH32244 - 32-BIT BUFFERS/DRIVERS

General Description

The ’ALVTH32244 devices are 32-bit buffers/line drivers designed for 2.5-V or 3.3-V VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.

These devices can be used as eight 4-bit buffers, four 8-bit buffers, two 16-bit buffers, or one 32-bit buffer.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN54HC595J 16-bit bus transceiver and transparant D-type latch nexperia
SN54LS00 QUAD 2-INPUT NAND GATE Motorola Inc
SN54LS01 QUAD 2-INPUT NAND GATE Motorola Inc
SN54LS02 QUAD 2-INPUT NOR GATE Motorola Inc
SN54LS03 QUAD 2-INPUT NAND GATE Motorola Inc

Other Datasheets by Texas Instruments

Part Number Description
SN54ALVTH32373 32-BIT TRANSPARENT D-TYPE LATCHES
SN54ALVTH32374 32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOPS
SN54ALVTH162244 16-BIT BUFFERS/DRIVERS
SN54ALVTH162245 16-BIT BUS TRANSCEIVERS
SN54ALVTH16240 16-BIT BUFFERS/DRIVERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
D State-of-the-Art Advanced BiCMOS Technology (ABT) Widebus ™ Design for 2.5-V and 3.3-V Operation and Low Static Power Dissipation D Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 2.3-V to 3.6-V VCC ) D Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C D High Drive (–24/24 mA at 2.5-V VCC and –32/64 mA at 3.3-V VCC) D Ioff and Power-Up 3-State Support Hot Insertion D Use Bus Hold on Data Inputs in Place of External Pullup/Pulldown Resistors to Prevent the Bus From Floating NOTE: For tape and reel order entry: The GKER package is abbreviated to KR. SN54ALVTH32244, SN74ALVTH32244 2.5-V/3.3-V 32-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCES279 – SEPTEMBER 1999 D Auto3-State Eliminates Bus Current Loading When Output Exceeds VCC + 0.