Datasheet4U Logo Datasheet4U.com

SN54AHCT74 - Dual Positive-Edge-Triggered D-Type Flip-Flops

Datasheet Summary

Description

The ’AHCT74 dual positive-edge-triggered devices are D-type flip-flops.

A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs.

Features

  • Operating range of 4.5 V to 5.5 V.
  • Low power consumption, 10-µA maximum ICC.
  • ±8-mA output drive at 5 V.
  • Inputs are TTL-voltage compatible.
  • Latch-up performance exceeds 250 mA per JESD 17 2.

📥 Download Datasheet

Datasheet preview – SN54AHCT74

Datasheet Details

Part number SN54AHCT74
Manufacturer Texas Instruments
File Size 2.79 MB
Description Dual Positive-Edge-Triggered D-Type Flip-Flops
Datasheet download datasheet SN54AHCT74 Datasheet
Additional preview pages of the SN54AHCT74 datasheet.

📁 Similar Datasheet

  • SN54HC595J - 16-bit bus transceiver and transparant D-type latch (nexperia)
  • SN54LS00 - QUAD 2-INPUT NAND GATE (Motorola Inc)
  • SN54LS01 - QUAD 2-INPUT NAND GATE (Motorola Inc)
  • SN54LS02 - QUAD 2-INPUT NOR GATE (Motorola Inc)
  • SN54LS03 - QUAD 2-INPUT NAND GATE (Motorola Inc)
  • SN54LS04 - HEX INVERTER (Motorola Inc)
  • SN54LS05 - HEX INVERTER (Motorola Inc)
  • SN54LS08 - QUAD 2-INPUT AND GATE (Motorola Inc)
  • SN54LS09 - QUAD 2-INPUT AND GATE (Motorola Inc)
  • SN54LS10 - TRIPLE 3-INPUT NAND GATE (Motorola Inc)
Other Datasheets by Texas Instruments

Full PDF Text Transcription

Click to expand full text
SN54AHCT74, SN74AHCT74 SCLS263Q – DECEMBER 1995 – REVISED JULY 2023 SNxAHCT74 Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear And Preset 1 Features • Operating range of 4.5 V to 5.5 V • Low power consumption, 10-µA maximum ICC • ±8-mA output drive at 5 V • Inputs are TTL-voltage compatible • Latch-up performance exceeds 250 mA per JESD 17 2 Applications • Convert a momentary switch to a toggle switch • Hold a signal during controller reset • Input slow edge-rate signals • Operate in noisy environments • Divide a clock signal by two 3 Description The ’AHCT74 dual positive-edge-triggered devices are D-type flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs.
Published: |