Datasheet4U Logo Datasheet4U.com

OPA2810 - Rail-to-Rail Input/Output FET-Input Operational Amplifier

General Description

The OPA2810 is a dual-channel, FET-input, voltagefeedback operational amplifier with low input bias current.

Key Features

  • 1 Gain-bandwidth product: 70 MHz.
  • Small-signal bandwidth: 105 MHz.
  • Slew rate: 192 V/µs.
  • Wide supply range: 4.75 V to 27 V.
  • Low noise:.
  • Input voltage noise: 6 nV/√Hz (f = 500 kHz).
  • Input current noise: 5 fA/√Hz (f = 10 kHz).
  • Rail-to-rail input and output:.
  • FET input stage: 2-pA input bias current (typical).
  • High linear output current: 75 mA.
  • Input offset: ±1.5 mV (maximum).
  • Offset drift: ±2.

📥 Download Datasheet

Datasheet Details

Part number OPA2810
Manufacturer Texas Instruments
File Size 2.50 MB
Description Rail-to-Rail Input/Output FET-Input Operational Amplifier
Datasheet download datasheet OPA2810 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
OPA2822 Low-Power / Single-Supply / Wideband Operational Amplifier Burr-Brown
OPA2827 OPERATIONAL AMPLIFIER Burr-Brown
OPA2830 Low-Power / Single-Supply / Wideband Operational Amplifier Burr-Brown
OPA2832 Low-Power / Single-Supply / Wideband Operational Amplifier Burr-Brown
OPA2889 Voltage Feedback OPERATIONAL AMPLIFIER Burr-Brown Corporation

Other Datasheets by Texas Instruments

Part Number Description
OPA2822 Low-Noise Operational Amplifier
OPA2828 JFET-Input Operational Amplifiers
OPA2830 OPERATIONAL AMPLIFIER
OPA2832 OPERATIONAL AMPLIFIER
OPA2834 Voltage-Feedback Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community OPA2810 SBOS789C – AUGUST 2017 – REVISED FEBRUARY 2020 OPA2810 Dual-Channel, 27-V, Rail-to-Rail Input/Output FET-Input Operational Amplifier 1 Features •1 Gain-bandwidth product: 70 MHz • Small-signal bandwidth: 105 MHz • Slew rate: 192 V/µs • Wide supply range: 4.75 V to 27 V • Low noise: – Input voltage noise: 6 nV/√Hz (f = 500 kHz) – Input current noise: 5 fA/√Hz (f = 10 kHz) • Rail-to-rail input and output: – FET input stage: 2-pA input bias current (typical) – High linear output current: 75 mA • Input offset: ±1.5 mV (maximum) • Offset drift: ±2 µV/°C (typical) • Low power: 3.