Datasheet4U Logo Datasheet4U.com

OPA2320-Q1 - CMOS Operational Amplifier

Download the OPA2320-Q1 datasheet PDF. This datasheet also covers the OPA320-Q1 variant, as both devices belong to the same cmos operational amplifier family and are provided as variant models within a single manufacturer datasheet.

General Description

The OPA320-Q1 and OPA2320-Q1 (OPAx320-Q1) devices are a new generation of precision low-voltage CMOS operational amplifiers (op amps) optimized for very low noise and wide bandwidth.

These devices operate on a low quiescent current of only 1.45 mA.

Key Features

  • 1 Qualified for Automotive.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (OPA320-Q1-etcTI.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
OPA2300 CMOS OPERATIONAL AMPLIFIER Burr-Brown
OPA2301 CMOS OPERATIONAL AMPLIFIER Burr-Brown
OPA2333 CMOS OPERATIONAL AMPLIFIERS Burr-Brown Corporation
OPA2334 0.05UV/C max / SINGLE-SUPPLY CMOS OPERATIONAL AMPLIFIERS Burr-Brown
OPA2335 0.05UV/C max / SINGLE-SUPPLY CMOS OPERATIONAL AMPLIFIERS Burr-Brown

Other Datasheets by Texas Instruments

Part Number Description
OPA2320 CMOS Operational Amplifier
OPA2320S CMOS Operational Amplifier
OPA2322 CMOS Operational Amplifier
OPA2322-Q1 CMOS Operational Amplifier
OPA2322S CMOS Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community OPA320-Q1, OPA2320-Q1 SLOS884B – SEPTEMBER 2014 – REVISED DECEMBER 2018 OPAx320-Q1 Precision, 20-MHz, 0.9-pA, Low-Noise, RRIO, CMOS Operational Amplifier 1 Features •1 Qualified for Automotive Applications • AEC-Q100 Qualified with the Following Results: – Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range – Device HBM ESD Classification Level 2 – Device CDM ESD Classification Level C4B • Precision with Zero-Crossover Distortion: – Low Offset Voltage: 150 µV (max) – High CMRR: 114 dB – Rail-to-Rail I/O • Low Input Bias Current: 0.9 pA (max) • Low Noise: 7 nV/√Hz at 10kHz • Wide Bandwidth: 20 MHz • Slew Rate: 10 V/µs • Quiescent Current: 1.