Datasheet4U Logo Datasheet4U.com

MSP50C604 - MIXED-SIGNAL PROCESSORS

Description

The MSP50C604 is a low-cost, mixed-signal processor that combines a speech synthesizer with a dedicated slave interface logic, general-purpose I/O, onboard ROM, and direct speaker-drive in a single package.

Features

  • make the input port especially useful as a key-scan interface. Slave mode consists of four general-purpose I/O, four control pins, and eight bidirectional data pins. A simple one-bit comparator is also included in the periphery. The comparator is enabled by a control register, and its access is shared with two pins in one general-purpose I/O port. Rounding out the MSP50C604 periphery is a built-in pulse-density-modulated DAC (digital-to-analog converter) with direct speaker-drive.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MSP5000 MSP PMC-Sierra
MSP5.0A Surface Mount TRANSZORB Transient Voltage Suppressors Vishay
MSP535 (MSP535 - MSP545) 5 Amp Schottky Rectifier Microsemi Corporation
MSP540 (MSP535 - MSP545) 5 Amp Schottky Rectifier Microsemi Corporation
MSP545 (MSP535 - MSP545) 5 Amp Schottky Rectifier Microsemi Corporation

Other Datasheets by Texas Instruments

Part Number Description
MSP50C601 MIXED-SIGNAL PROCESSORS
MSP50C605 MIXED-SIGNAL PROCESSORS
MSP50C614 MIXED-SIGNAL PROCESSORS
MSP50C30 MIXED-SIGNAL PROCESSOR
MSP50C32 MIXED-SIGNAL PROCESSORS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MSP50C604 MIXED-SIGNAL PROCESSOR D Advanced, Integrated Speech Synthesizer for High-Quality Sound D Operates up to 12.32 MHz (Performs up to 12 MIPS) D Slave Mode Enables Hours of Speech Using an External Processor and Memory D Master Mode Allows 6.8 Mins of Speech Onboard D Supports High-Quality Synthesis Algorithms such as MELP, CELP, LPC, ADPCM, and Polyphonic Music D Simultaneous Speech Plus Music Capabilities D Very Low-Power Operation, Ideal for Hand-Held Devices D Low-Voltage Operation, Sustainable by Three (3) Batteries D Reduced Power Standby Modes, Less Than 10 µA in Deep-Sleep Mode SPSS028B – MAY 2000 – REVISED FEBRUARY 2001 D 16 General-Purpose I/O Pins (in Master Mode) or 4 General-Purpose I/O Pins (in Slave Mode) D Resistor-Trimmed Oscillator or 32.
Published: |