Datasheet4U Logo Datasheet4U.com

MSP50C30 - MIXED-SIGNAL PROCESSOR

Description

The MSP50C30 combines an 8-bit microprocessor, two speech synthesizers, ROM, RAM, and I/O in a low-cost single-chip system.

Features

  • two independent channels of linear predictive coding (LPC), which synthesize high-quality speech at a low data rate. Pulse-code modulation (PCM) can produce music or sound effects. For more information, see the MSP50C30 User’s Guide (TI literature number SPSU012). PJM.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MSP5000 MSP PMC-Sierra
MSP5.0A Surface Mount TRANSZORB Transient Voltage Suppressors Vishay
MSP535 (MSP535 - MSP545) 5 Amp Schottky Rectifier Microsemi Corporation
MSP540 (MSP535 - MSP545) 5 Amp Schottky Rectifier Microsemi Corporation
MSP545 (MSP535 - MSP545) 5 Amp Schottky Rectifier Microsemi Corporation

Other Datasheets by Texas Instruments

Part Number Description
MSP50C32 MIXED-SIGNAL PROCESSORS
MSP50C33 MIXED-SIGNAL PROCESSORS
MSP50C34 MIXED-SIGNAL PROCESSORS
MSP50C37 MIXED-SIGNAL PROCESSORS
MSP50C601 MIXED-SIGNAL PROCESSORS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MSP50C30 MIXED-SIGNAL PROCESSOR D Interface to External ROM/EPROM (Up to 8 MBytes) D 8-Bit Microprocessor with 61 instructions D 32 Twelve-Bit Words and 992 Bytes of RAM D 4K Internal ROM SPSS021 NOVEMBER 1998 D 3.3V to 6.5V CMOS Technology for Low Power Dissipation D 28 Software-Configurable I/O Lines D 10-kHz or 8-kHz Speech Sample Rate description The MSP50C30 combines an 8-bit microprocessor, two speech synthesizers, ROM, RAM, and I/O in a low-cost single-chip system. The architecture uses the same arithmetic logic unit (ALU) for the two synthesizers and the microprocessor, thus reducing chip area and cost and enabling the microprocessor to do a multiply operation in 0.8 µs.
Published: |