MSP430i2030
Overview
- Supply voltage range: 2.2 V to 3.6 V
- High-performance analog - MSP430i204x: Four 24-bit sigma-delta analogto-digital converters (ADCs) with differential PGA inputs - MSP430I203x: Three 24-bit sigma-delta analogto-digital converters (ADCs) with differential PGA inputs - MSP430I202x: Two 24-bit sigma-delta analogto-digital converters (ADCs) with differential PGA inputs
- Ultra-low power consumption - Active mode (AM): All system clocks active 275 µA/MHz at 16.384-MHz, 3.0 V, flash program execution (typical) - Standby mode (LPM3): Watchdog timer active, full RAM retention 210 µA at 3.0 V (typical) - Off mode (LPM4): Full RAM retention 70 µA at 3.0 V (typical) - Shutdown mode (LPM4.5): 75 nA at 3.0 V (typical)
- Intelligent digital peripherals - Two 16-bit timers with three capture/compare registers each - Hardware multiplier supports 16-bit operations
- Enhanced universal serial communication interfaces (eUSCIs) - eUSCI_A0 - Enhanced UART with automatic baud-rate detection - IrDA encoder and decoder - Synchronous SPI - eUSCI_B0 - Synchronous SPI - I2C
- Flexible power management system - Integrated LDO with 1.8-V regulated core supply voltage - Supply voltage monitor with programmable level detection - Brownout detector - Built-in voltage reference - Temperature sensor
- Clock system - 16.384-MHz internal digitally controlled oscillator (DCO) - DCO operation with internal or external resistor - External digital clock source
- Development tools and software (also see Tools and Software) - EVM430-I2040S evaluation module (EVM) for metering - MSP-TS430RHB32A 100-pin t
