MSP430FR6988
Overview
- Embedded Microcontroller - 16-Bit RISC Architecture up to 16-MHz Clock - Wide Supply Voltage Range From 3.6 V Down to 1.8 V (Minimum Supply Voltage is Restricted by SVS Levels, See the SVS Specifications)
- Optimized Ultra-Low-Power Modes - Active Mode: Approximately 100 µA/MHz - Standby (LPM3 With VLO): 0.4 µA (Typical) - Real-Time Clock (RTC) (LPM3.5): 0.35 µA (Typical) (1) - Shutdown (LPM4.5): 0.02 µA (Typical)
- Ultra-Low-Power Ferroelectric RAM (FRAM) - Up to 128KB of Nonvolatile Memory - Ultra-Low-Power Writes - Fast Write at 125 ns per Word (64KB in 4 ms) - Unified Memory = Program + Data + Storage in One Single Space - 1015 Write Cycle Endurance - Radiation Resistant and Nonmagnetic
- Intelligent Digital Peripherals - 32-Bit Hardware Multiplier (MPY) - Three-Channel Internal Direct Memory Access (DMA) - RTC With Calendar and Alarm Functions - Five 16-Bit Timers With up to 7 Capture/Compare Registers Each - 16-Bit and 32-Bit Cyclic Redundancy Checker (CRC16, CRC32)
- High-Performance Analog - Extended Scan Interface (ESI) for Background Water, Heat, and Gas Volume Measurement - 16-Channel Analog Comparator - 12-Bit Analog-to-Digital Converter (ADC) With Internal Reference and Sample-and-Hold and up to 16 External Input Channels - Integrated LCD Driver With Contrast Control for up to 320 Segments
- Multifunction Input/Output Ports - All P1 to P10 and PJ Pins Support Capacitive Touch Capability Without Need for External Components (1) RTC is clocked by a 3.7-pF crystal. - Accessible Bit-, Byte- and Word-Wise (in Pairs) - Edge-Selectable Wakeup
