Datasheet4U Logo Datasheet4U.com

LV244A - Octal Buffers/Drivers

General Description

The SN74LV244A octal buffers and line drivers are designed for 2-V to 5.5-V VCC operation.

The SN74LV244A devices are designed specifically to improve both performance and density of the 3state memory address drivers, clock drivers, and busoriented receivers and transmitters.

Key Features

  • 1 2-V to 5.5-V VCC Operation.
  • Max tpd of 6.5 ns at 5 V.
  • Typical VOLP (Output Ground Bounce) 2.3 V at VCC = 3.3 V, TA = 25°C.
  • Support Mixed-Mode Voltage Operation on All Ports.
  • Ioff Supports Partial-Power-Down Mode Operation.
  • Latch-Up Performance Exceeds 250-mA Per JESD 17.
  • ESD Protection Exceeds JESD 22.
  • 2000-V Human-Body Model (A114-A).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LV244 OCTAL BUFFER/LINE DRIVE System Logic Semiconductor
LV24000 Development Sanyo
LV24003LP Ultra-compact FM tuner Sanyo Semicon Device
LV2400x Ultraminiature FM Radio ICs Sanyo
LV2401 VHF HYPERABRUPT TUNING DIODES Knox Semiconductor Inc

Other Datasheets by Texas Instruments

Part Number Description
LV244AT Octal Buffers/Drivers
LV2862 Wide Input Voltage Range Buck Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community Reference Design SN74LV244A SCLS383N – SEPTEMBER 1997 – REVISED OCTOBER 2015 SN74LV244A Octal Buffers and Drivers With 3-State Outputs 1 Features •1 2-V to 5.5-V VCC Operation • Max tpd of 6.5 ns at 5 V • Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) >2.3 V at VCC = 3.