Datasheet4U Logo Datasheet4U.com

LMH6657 - 270-MHz Single Supply Single/Dual Amplifiers

General Description

The LMH6657 and LMH6658 devices are low-cost operational amplifiers that operate from a single supply with input voltage range extending below the V

.

Key Features

  • VS 1 = 5 V, TA = 25°C, RL = 100 Ω (Typical Values Unless Specified).
  • 3dB BW (AV = +1) 270 MHz.
  • Supply Voltage Range 3 V to 12 V.
  • Slew Rate, (VS = ±5 V) 700 V/µs.
  • Supply Current 6.2 mA/amp.
  • Output Current +80/.
  • 90 mA.
  • Input Common-Mode Volt. 0.5 V Beyond V.
  • , 1.7 V from V+.
  • Output Voltage Swing (RL = 2 kΩ) 0.8 V from Rails.
  • Input Voltage Noise 11 nV/√Hz.
  • Input Current Noise 2.1 pA√Hz/.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LMH6657 270MHz Single Supply Single/Dual Amplifiers National Semiconductor
LMH6654 Single/Dual Low Power / 250 MHz / Low Noise Amplifiers National Semiconductor
LMH6655 Single/Dual Low Power / 250 MHz / Low Noise Amplifiers National Semiconductor
LMH6658 270MHz Single Supply Single/Dual Amplifiers National Semiconductor
LMH6601 2.4V CMOS Op Amp National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LMH6654 Low Noise Amplifiers
LMH6655 Low Noise Amplifiers
LMH6658 270-MHz Single Supply Single/Dual Amplifiers
LMH6601 2.4-V CMOS Operational Amplifier
LMH6601-Q1 2.4-V CMOS Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community LMH6657, LMH6658 SNOSA35G – AUGUST 2002 – REVISED JULY 2015 LMH6657 and LMH6658 270-MHz Single Supply, Single and Dual Amplifiers 1 Features VS 1 = 5 V, TA = 25°C, RL = 100 Ω (Typical Values Unless Specified) • −3dB BW (AV = +1) 270 MHz • Supply Voltage Range 3 V to 12 V • Slew Rate, (VS = ±5 V) 700 V/µs • Supply Current 6.2 mA/amp • Output Current +80/−90 mA • Input Common-Mode Volt. 0.5 V Beyond V−, 1.7 V from V+ • Output Voltage Swing (RL = 2 kΩ) 0.8 V from Rails • Input Voltage Noise 11 nV/√Hz • Input Current Noise 2.1 pA√Hz/ • DG Error 0.03% • DP Error 0.10° • THD (5MHz) −55 dBc • Settling Time (0.