Datasheet4U Logo Datasheet4U.com

LMH6654 - Low Noise Amplifiers

Description

The LMH6654 and LMH6655 single and dual high speed voltage feedback amplifiers are designed to have unity-gain stable operation with a bandwidth of 250 MHz.

They operate from ±2.5 V to ±6 V and each channel consumes only 4.5 mA.

Features

  • 1 (VS = ±5 V, TJ = 25 °C, Typical Values Unless Specified).
  • Voltage Feedback Architecture.
  • Unity Gain Bandwidth 250 MHz.
  • Supply Voltage Range ±2.5V to ±6V.
  • Slew Rate 200 V/µsec.
  • Supply Current 4.5 mA/channel.
  • Input Common Mode Voltage.
  • 5.15V to +3.7V.
  • Output Voltage Swing (RL = 100 Ω).
  • 3.6V to 3.4V.
  • Input Voltage Noise 4.5 nV/√Hz.
  • Input Current Noise 1.7 pA/√Hz.
  • Settling Time to 0.0.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LMH6654 Single/Dual Low Power / 250 MHz / Low Noise Amplifiers National Semiconductor
LMH6655 Single/Dual Low Power / 250 MHz / Low Noise Amplifiers National Semiconductor
LMH6657 270MHz Single Supply Single/Dual Amplifiers National Semiconductor
LMH6658 270MHz Single Supply Single/Dual Amplifiers National Semiconductor
LMH6601 2.4V CMOS Op Amp National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LMH6655 Low Noise Amplifiers
LMH6657 270-MHz Single Supply Single/Dual Amplifiers
LMH6658 270-MHz Single Supply Single/Dual Amplifiers
LMH6601 2.4-V CMOS Operational Amplifier
LMH6601-Q1 2.4-V CMOS Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community LMH6654, LMH6655 SNOS956E – JUNE 2001 – REVISED AUGUST 2014 LMH6654, LMH6655 Single and Dual Low Power, 250 MHz, Low Noise Amplifiers 1 Features •1 (VS = ±5 V, TJ = 25 °C, Typical Values Unless Specified) • Voltage Feedback Architecture • Unity Gain Bandwidth 250 MHz • Supply Voltage Range ±2.5V to ±6V • Slew Rate 200 V/µsec • Supply Current 4.5 mA/channel • Input Common Mode Voltage −5.15V to +3.7V • Output Voltage Swing (RL = 100 Ω) −3.6V to 3.4V • Input Voltage Noise 4.5 nV/√Hz • Input Current Noise 1.7 pA/√Hz • Settling Time to 0.
Published: |