Datasheet4U Logo Datasheet4U.com

LMH6619Q - 1.25mA RRIO Operational Amplifiers

Description

The LMH6619Q (dual) is a 130 MHz rail-to-rail input and output amplifier designed for ease of use in a wide range of applications requiring high speed, low supply current, low noise, and the ability to drive complex ADC and video loads.

Features

  • 1.
  • 23 VS = 5V, RL = 1 kΩ, TA = 25°C and AV = +1, unless otherwise specified.
  • Operating voltage range 2.7V to 11V.
  • Supply current per channel 1.25 mA.
  • Small signal bandwidth 130 MHz.
  • Input offset voltage (limit at 25°C) ±0.75 mV.
  • Slew rate 55 V/µs.
  • Settling time to 0.1% 90 ns.
  • Settling time to 0.01% 120 ns.
  • SFDR (f = 100 kHz, AV = +1, VOUT = 2 VPP) 100 dBc.
  • 0.1 dB bandwidth (AV = +2) 15 MHz.
  • Low vol.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LMH6601 2.4V CMOS Op Amp National Semiconductor
LMH6609 900MHz Voltage Feedback Op Amp National Semiconductor
LMH6622 Dual Wideband / Low Noise / 160MHz / Operational Amplifiers National Semiconductor
LMH6624 Single/Dual Ultra Low Noise Wideband Operational Amplifier National Semiconductor
LMH6626 Single/Dual Ultra Low Noise Wideband Operational Amplifier National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LMH6619 1.25mA RRIO Operational Amplifiers
LMH6611 Single Supply 345 MHz Rail-to-Rail Output Amplifiers
LMH6612 Single Supply 345 MHz Rail-to-Rail Output Amplifiers
LMH6618 1.25mA RRIO Operational Amplifiers
LMH6601 2.4-V CMOS Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LMH6619Q www.ti.com SNOSC78A – JUNE 2012 – REVISED NOVEMBER 2012 LMH6619Q 130 MHz, 1.25 mA RRIO Operational Amplifier Check for Samples: LMH6619Q FEATURES 1 •23 VS = 5V, RL = 1 kΩ, TA = 25°C and AV = +1, unless otherwise specified. • Operating voltage range 2.7V to 11V • Supply current per channel 1.25 mA • Small signal bandwidth 130 MHz • Input offset voltage (limit at 25°C) ±0.75 mV • Slew rate 55 V/µs • Settling time to 0.1% 90 ns • Settling time to 0.01% 120 ns • SFDR (f = 100 kHz, AV = +1, VOUT = 2 VPP) 100 dBc • 0.
Published: |