Datasheet4U Logo Datasheet4U.com

LMH6611 - Single Supply 345 MHz Rail-to-Rail Output Amplifiers

General Description

The LMH6611 (single, with shutdown) and LMH6612 (dual) are 345 MHz rail-to-rail output amplifiers consuming just 3.2 mA of quiescent current per channel and designed to deliver high performance in power conscious single supply systems.

Key Features

  • 1.
  • 23 VS = 5V, RL = 1 kΩ, TA = 25°C and AV = +1, Unless Otherwise Specified.
  • Operating Voltage Range 2.7V to 11V.
  • Supply Current Per Channel 3.2 mA.
  • Small Signal Bandwidth 345 MHz.
  • Open Loop Gain 103 dB.
  • Input Offset Voltage (Limit at 25°C) ±1.5 mV.
  • Slew Rate 460 V/µs.
  • 0.1 dB Bandwidth 45 MHz.
  • Settling Time to 0.1% 67 ns.
  • Settling Time to 0.01% 100 ns.
  • SFDR (f = 100 kHz, AV = 2, VOUT = 2 VPP) 102 d.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LMH6611, LMH6612 www.ti.com SNOSB00K – NOVEMBER 2007 – REVISED OCTOBER 2013 LMH6611/LMH6612 Single Supply 345 MHz Rail-to-Rail Output Amplifiers Check for Samples: LMH6611, LMH6612 FEATURES 1 •23 VS = 5V, RL = 1 kΩ, TA = 25°C and AV = +1, Unless Otherwise Specified. • Operating Voltage Range 2.7V to 11V • Supply Current Per Channel 3.2 mA • Small Signal Bandwidth 345 MHz • Open Loop Gain 103 dB • Input Offset Voltage (Limit at 25°C) ±1.5 mV • Slew Rate 460 V/µs • 0.1 dB Bandwidth 45 MHz • Settling Time to 0.1% 67 ns • Settling Time to 0.01% 100 ns • SFDR (f = 100 kHz, AV = 2, VOUT = 2 VPP) 102 dBc • Low Voltage Noise 10 nV/√Hz • Output current ±100 mA • CMVR −0.2V to 3.