Datasheet4U Logo Datasheet4U.com

LM96530 - Ultrasound Transmit/Receive Switch

Description

The LM96530 is an eight-channel monolithic highvoltage, high-speed T/R (Transmit/Receive) switch for multi-channel medical ultrasound applications.

Features

  • 1.
  • 2 8-Channel High-Voltage Receive Side Switches without Charge-Injection.
  • Can be Used for Receive Protection and/or Receive Multiplexing with SPI™ Compatible Bus Control.
  • Channel Bandwidth Supports 1MHz to 20MHz Transducers.
  • Input Accepts Pulses and Continuous-Wave Signals within ±60V.
  • Integrated Output Clamping Diodes Limit Output to ±0.7V.
  • Low Harmonic Distortion HD2 at -75dBc at 5MHz.
  • Continuous-Wave Operation.
  • Soft-Swit.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM96530 Ultrasound Transmit/Receive Switch National Semiconductor
LM96511 Ultrasound Receive Analog Front-End National Semiconductor
LM96550 Ultrasound Transmit Pulser National Semiconductor
LM96570 Ultrasound Configurable Transmit Beamformer National Semiconductor Corporation
LM96000 Hardware Monitor National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LM96511 Ultrasound Receive Analog Front-End
LM96550 Ultrasound Transmit Pulser
LM96551 Ultrasound Transmit Pulser
LM96570 Ultrasound Configurable Transmit Beamformer
LM96000 Hardware Monitor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM96530 www.ti.com SNAS499F – AUGUST 2010 – REVISED MAY 2013 LM96530 Ultrasound Transmit/Receive Switch Check for Samples: LM96530 FEATURES 1 •2 8-Channel High-Voltage Receive Side Switches without Charge-Injection • Can be Used for Receive Protection and/or Receive Multiplexing with SPI™ Compatible Bus Control • Channel Bandwidth Supports 1MHz to 20MHz Transducers • Input Accepts Pulses and Continuous-Wave Signals within ±60V • Integrated Output Clamping Diodes Limit Output to ±0.7V • Low Harmonic Distortion HD2 at -75dBc at 5MHz • Continuous-Wave Operation • Soft-Switcher Based on a Diode Bridge Architecture Yielding Better Noise Performance and Faster Turn-On and -Off Times than Competing T-Gate Switch Architectures • 2.5V to 3.
Published: |