LM4863 Datasheet | Texas Instruments

.ti. SNAS114F - OCTOBER 1999 - REVISED MAY 2013 Dual 2.2W Audio Amplifier Plus Stereo Headphone Function Check for Samples: LM4863 Features APPLICATIONS - 2 Stereo Headphone Amplifier Mode - “Click and Pop” Suppression Circuitry - Unity-Gain Stable - Thermal Shutdown Protection Circuitry - SOIC, TSSOP, exposed-DAP TSSOP, and WQFN packages KEY SPECIFICATIONS - PO at 1% THD+N - LM4863LQ, 3Ω, 4Ω loads: 2.5W(typ), 2.2W(typ) - LM4863MTE, 3Ω, 4Ω loads: 2.5W(typ), 2.2W(typ) - LM4863MTE, 8Ω load: 1.1W(typ) - LM4863, 8Ω: 1.1W(typ) - Single-ended mode THD+N at 75m W into 32Ω: 0.5%(max) - Shutdown current: 0.7μA(typ) - Supply voltage range: 2.0V to 5.5V - Multimedia Monitors - Portable and Desktop puters - Portable Televisions DESCRIPTION The LM4863 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.2W to a 4Ω load or 2.5W to a 3Ω load with less than 1.0% THD+N (see Notes below). In addition, the headphone input pin allows the amplifiers to operate in single-ended mode when driving stereo headphones. Boomer audio power amplifiers were designed specifically to provide high quality output power from a surface mount package while requiring few external ponents. To simplify audio system design, the LM4863 bines dual bridge speaker amplifiers and stereo headphone amplifiers on one chip. The LM4863 Features an externally controlled, lowpower consumption shutdown mode, a stereo headphone amplifier mode, and thermal shutdown protection. It also utilizes circuitry to reduce “clicks and pops” during device...