Datasheet4U Logo Datasheet4U.com

LM3370 - Dual Synchronous Step-Down DC-DC Converter

Description

The LM3370 is a dual step-down DC-DC converter optimized for powering ultra-low voltage circuits from a single Li-Ion battery and input rail ranging from 2.7V to 5.5V.

It provides two outputs with 600mA load per channel.

Features

  • 1.
  • 2 I2C-compatible interface.
  • VOUT1 = 1V to 2V in 50 mV Steps.
  • VOUT2 = 1.8V to 3.3V in 100 mV Steps.
  • Automatic PFM/PWM Mode Switching and Forced PWM Mode for Low Noise Operation.
  • Spread Spectrum Capability Using I2C.
  • 600mA Load Per Channel.
  • 2MHz PWM Fixed Switching Frequency (Typ. ).
  • The Bucks Operate 180° Out-of-Phase Timing Offset for Noise and Input Surge Current Abatement.
  • Internal Synchronous Rectification for H.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM3370 Dual Synchronous Step-Down DC-DC Converter National Semiconductor
LM337 THREE-TERMINAL ADJUSTABLE NEGATIVE VOLTAGE REGULATOR ON Semiconductor
LM337 3-Terminal 1.5A Negative Adjustable Regulator Fairchild Semiconductor
LM337 Three-terminal adjustable negative voltage regulators STMicroelectronics
LM337 3-Terminal Adjustable Negative Regulators National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LM337 3-Terminal Adjustable Regulators
LM337-N 3-Terminal Adjustable Negative Regulators
LM337HV 3-Terminal Adjustable Negative Regulators
LM337L 3-Terminal Adjustable Regulator
LM337LM 3-Terminal Adjustable Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM3370 www.ti.com SNVS406N – NOVEMBER 2005 – REVISED MAY 2013 LM3370 Dual Synchronous Step-Down DC-DC Converter with Dynamic Voltage Scaling Function Check for Samples: LM3370 FEATURES 1 •2 I2C-compatible interface – VOUT1 = 1V to 2V in 50 mV Steps – VOUT2 = 1.8V to 3.3V in 100 mV Steps – Automatic PFM/PWM Mode Switching and Forced PWM Mode for Low Noise Operation – Spread Spectrum Capability Using I2C • 600mA Load Per Channel • 2MHz PWM Fixed Switching Frequency (Typ.) • The Bucks Operate 180° Out-of-Phase Timing Offset for Noise and Input Surge Current Abatement • Internal Synchronous Rectification for High Efficiency • Internal Soft Start • Power-on-Reset Function for Both Outputs • 2.7V ≤ VIN ≤ 5.5V • Operates from a Single Li-Ion Cell or 3 Cell NiMH/NiCd Batteries and 3.3V/5.